NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Tru2Chevy · 09-16-2007, 09:47 PM

Get as much fluid in the TC as you can.....the more you get in before installing it the better. It will make topping off the trans fluid easier once everything is together.

Install the TC onto the input shaft of the trans (carefully - don't wanna damage the seal), then bolt the bellhousing of the trans to the block. Then you'll bolt the converter to the flexplate.

- Justin

09-16-2007, 09:47 PM	#2
Tru2Chevy Co-Founder / Site Admin Join Date: Jul 2004 Location: Ewing, NJ Posts: 22,476 iTrader: (8) Social Networks:	Get as much fluid in the TC as you can.....the more you get in before installing it the better. It will make topping off the trans fluid easier once everything is together. Install the TC onto the input shaft of the trans (carefully - don't wanna damage the seal), then bolt the bellhousing of the trans to the block. Then you'll bolt the converter to the flexplate. - Justin __________________ 1999 Camry - Beigemobile DD 2002 Suburban - Wife's DD 2004 Grand Cherokee - Not running / Project / Selling?