there should be a little c-clip (iirc) holding the shifter knob on, pull it out, pull the shifter knob up and off. next remove the torx screws (i believe there is 8 ) from the shifter bezel and pull that off...there is a thing bolted to the shifter with what i think is 2 bolts, it is (iirc) about 2 in x 5 in and curved to follow the shifter unit. thats the NSS. has a 6 cable harness plugged into it. loosen the 2 bolts, adjust as necessary, tighten the bolts, and install everythign in reverse order.
__________________
87 iroc with the usual go fast stuff
heavier than your half ton.
|