NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

ins0mnia24 · 05-16-2008, 09:29 PM

Depends what is wrong with your existing rear if you use the 4 channel rear end then you would have to drill a hole on top of the pumpkin for the Abs sensor.
Because a 3 channel only has 1 Abs sensor and a 4 channel set-up has 2 Abs sensors one on the end of each axle.
You can use the 4 channel axles and everything else inside of the rear end on your current rear without doing any modifications though.

05-16-2008, 09:29 PM	#2
ins0mnia24 Join Date: Aug 2005 Location: Millville & Little ferry New Jersey Posts: 454 iTrader: (2)	Depends what is wrong with your existing rear if you use the 4 channel rear end then you would have to drill a hole on top of the pumpkin for the Abs sensor. Because a 3 channel only has 1 Abs sensor and a 4 channel set-up has 2 Abs sensors one on the end of each axle. You can use the 4 channel axles and everything else inside of the rear end on your current rear without doing any modifications though. __________________ 2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E. QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn. Cartek Tuned...