NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

ZeroCool8891 · 06-30-2008, 07:07 PM

ok guys i have an SES light on. i pulled the codes and got a code 22. i looked it up and i got this "TPS voltage was under 0.2 volts for 3 seconds when the engine was running". bascily it means from what i was told that the TPS is under the .2 volts that it should be. now i check it out and thats deff the problem, i used a volts meter and the wires are under .2 my question is how do i fix this, i dunno if its a switch or a relay or a fuse or what i got most of the problum slove just need to know how to fix.

Thanks

Oh BTW its my 88 iroc 350 tpi

06-30-2008, 07:07 PM	#1
ZeroCool8891 Join Date: Apr 2006 Location: Landing, NJ Posts: 1,042 iTrader: (17)	Code 22 ok guys i have an SES light on. i pulled the codes and got a code 22. i looked it up and i got this "TPS voltage was under 0.2 volts for 3 seconds when the engine was running". bascily it means from what i was told that the TPS is under the .2 volts that it should be. now i check it out and thats deff the problem, i used a volts meter and the wires are under .2 my question is how do i fix this, i dunno if its a switch or a relay or a fuse or what i got most of the problum slove just need to know how to fix. Thanks Oh BTW its my 88 iroc 350 tpi __________________ 87 Trans Am 5.7, Auto, posi disc rear, flowmaster muffler, all org car. 88 Iroc-Z TPI, Cammed 350, Vortex Heads, Magnaflow, T5, 4 Wheel Disc, 3.27 9 Bolt PBR. 91 Trans Am VertTPI 350. 700r4, K&N Air Cone, Ryven Muffler.