NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Tru2Chevy · 07-08-2008, 08:18 PM

Are those factory sways, or aftermarket? Factory WS6 sways are 36mm/24mm.

Rear springs on a 3rd gen can be swapped in less than 10 minutes, from the time you start jacking up the rear until the time you are lowering the car back on the ground. The fronts take longer, but still aren't difficult, as long as you take your time and are careful with them.

As far as what springs to go with, since you don't want to drop the car, I would stick with new WS6 springs. Should be able to get a set pretty cheap.

- Justin

07-08-2008, 08:18 PM	#2
Tru2Chevy Co-Founder / Site Admin Join Date: Jul 2004 Location: Ewing, NJ Posts: 22,476 iTrader: (8) Social Networks:	Are those factory sways, or aftermarket? Factory WS6 sways are 36mm/24mm. Rear springs on a 3rd gen can be swapped in less than 10 minutes, from the time you start jacking up the rear until the time you are lowering the car back on the ground. The fronts take longer, but still aren't difficult, as long as you take your time and are careful with them. As far as what springs to go with, since you don't want to drop the car, I would stick with new WS6 springs. Should be able to get a set pretty cheap. - Justin __________________ 1999 Camry - Beigemobile DD 2002 Suburban - Wife's DD 2004 Grand Cherokee - Not running / Project / Selling?