Quote:
Originally Posted by 5.7TA
Hey,
Currently deployed for a year, hope someone on here can help me out.
Every time I replace the Turn Signal Bulbs in my vehicle they burn out, also the flasher unit has had to be replaced at least three times over the last year.
The passenger side fog lamp assembly got a little too much water on a trip back from PA and ended up shorting out. That was fixed by a dealer but they didn't mention if there could be after effecs. Maybe this is a side effect of the fog lamp issue, not really sure. The probem didn't start happening until after the fog lamp issue.
Any ideas or suggestion would be welcome, thanks
|
These aren't connected so really shouldn't be your problem. I would look into the sockets in the front which tend to get burnt pretty badly. Water can get in there as well and cause problems. Mine weren't in the best of shape so I replaced them with new ones and dropped in some LEDs. Got new clear houses as well and I don't expect to have ANY issues even though I had none before.
Check the harness grounds as well for corrosion. Don't forget the tail light lamps and harness as well.
All are kind of a PITA but start by checking all the sockets to see if they are burnt and work from there.