NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - 3rd gen

IROCdan330 · 02-19-2009, 05:15 AM

dont forget to:

a. get a prop valve from a disc rear third gen or
b. get an adjustable prop valve from jegs, summit, etc.

otherwise your rear brakes MAY not work.

As far as the junction for the 2 lines going each way, there is a little block that has the 1 line from the front going into it and it has 2 outs on its sides. It bolts to the diff area. This can be swapped from your rear to the new one.

02-19-2009, 05:15 AM	#13
IROCdan330 12 Second Club Join Date: Sep 2004 Location: Vineland Posts: 928 iTrader: (0)	dont forget to: a. get a prop valve from a disc rear third gen or b. get an adjustable prop valve from jegs, summit, etc. otherwise your rear brakes MAY not work. As far as the junction for the 2 lines going each way, there is a little block that has the 1 line from the front going into it and it has 2 outs on its sides. It bolts to the diff area. This can be swapped from your rear to the new one. __________________ 87 iroc with the usual go fast stuff heavier than your half ton.