NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - In a bind! Anyone in the area have a LT1 clutch fork?

Pampered-Z · 03-16-2009, 02:31 PM

Thanks again Bill.

This project is a nightmare. The car has been in various stages of disasemmbly over the past 13 years. There are tons of boxes and bags of "stuff" We have up to 6 of the same parts, and others are just missing.

So after we start putting te car together I find a box and it contains the inspection shield, and a clutch fork. Later digging thru another box of fuel system parts, suprise,,,, anoither fork. And today UPS shows up with one that was ordered.

Wireharness was not stock, and it looks like either something in the wiring harness, or the starter is bad. Hopefully this is the last problem to overcome and then it should be running.

03-16-2009, 02:31 PM	#9
Pampered-Z Sliderule / Moderator Join Date: Oct 2004 Location: Catawissa PA Posts: 2,294 iTrader: (1)	Thanks again Bill. This project is a nightmare. The car has been in various stages of disasemmbly over the past 13 years. There are tons of boxes and bags of "stuff" We have up to 6 of the same parts, and others are just missing. So after we start putting te car together I find a box and it contains the inspection shield, and a clutch fork. Later digging thru another box of fuel system parts, suprise,,,, anoither fork. And today UPS shows up with one that was ordered. Wireharness was not stock, and it looks like either something in the wiring harness, or the starter is bad. Hopefully this is the last problem to overcome and then it should be running. __________________ 93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada 1) Build it 2) Race it 3) Break it 4) Repeat!!!