NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

JSPERFORMANCE · 05-05-2009, 08:40 AM

Shownomercy - please do not give tech advice on a subject you have no first hand knowledge in. Reading on the internet does not make you an expert and may cause someone to get confused when you give incomplete information.

Camaro 2 you - the lifters do not NEED to be replaced with most mild aftermarket grinds, but you are correct in thinking the "might as well" direction. In your case a simple cam and spring swap is not all that difficult since you will already have the pump and chain off.

05-05-2009, 08:40 AM	#12
JSPERFORMANCE NJFBOA Supporting Sponsor Join Date: Feb 2006 Location: HULMEVILLE, PA Posts: 2,023 iTrader: (4) Social Networks:	Shownomercy - please do not give tech advice on a subject you have no first hand knowledge in. Reading on the internet does not make you an expert and may cause someone to get confused when you give incomplete information. Camaro 2 you - the lifters do not NEED to be replaced with most mild aftermarket grinds, but you are correct in thinking the "might as well" direction. In your case a simple cam and spring swap is not all that difficult since you will already have the pump and chain off. __________________ JSSPEEDANDCUSTOM.COM Last edited by JSPERFORMANCE; 05-05-2009 at 08:41 AM.