|
1. Disconnect throttle body air duct, then remove serpentine drive belt.
2. Remove water pump refer to Cooling System/Water Pump, then the crankshaft balancer assembly using torsional damper remover tool No. J 24420, or equivalent.
3. Remove power steering pump and bracket, then the oil pan assembly refer to Engine/Engine Lubrication/Oil Pan, Engine.
4. Disconnect lower radiator hose from front cover assembly, then remove crankshaft sensor.
5. Remove front cover assembly.
6. Reverse procedure to install, noting the following:
1. Tighten fasteners to specifications.
2. Coat both sides of lower tabs of front cover gasket with sealer No. 1052080, or equivalent (RTV).
3. Install crankshaft balancer assembly using torsional damper installer tool No. J 29113, or equivalent.
|