|
On the "A" (Grey) connector of the ECM pin 12 is the IGN coil out wire.
[A12] Ignition Coil W (HOT, connect other black wire on coil to ground) 10A
Check you can voltage at that point, will help determine where in-stream you problem may be. I'd bet you can power at that pin.
Note: It's very rare for something like a fuseable link to fail. Far more common for the Ign module or coil to go and either can go without warning and often neither failing will throw a code.
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
1) Build it
2) Race it
3) Break it
4) Repeat!!!
|