Thread: Window motor
View Single Post
Old 07-14-2009, 09:40 AM   #18
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,368
iTrader: (12)
Quote:
Originally Posted by Njgunslinger View Post
yeah, well what would cause the window not to go all the way up near the mirror? I replaced the window motor but does the same thing. I can push the window up but then slips down again. Would this be the regulator, or is there another part in there that may have broke or worn?
there is an adjustment towards the back of the door. it may have worked loose. its a 10 mm nut that holds a piece of track up. just check and recheck because if its too high, it will get stuck on the roof/ttop weather stripping. i'll try to find a pic. shbox.com probably has one



best pic i can find. bottom right of pic, this is on the latch side of the door. on the outside of the door there is a 10mm nut in a slotted section on the door. check that out!
__________________

Last edited by sweetbmxrider; 07-14-2009 at 09:44 AM.
sweetbmxrider is offline   Reply With Quote