Quote:
Originally Posted by ShowSomePromise
Something smaller than an 847, its going to want to pull pretty high, and with stock heads you will be choking it.
Granted this is just my humble opinion. The new 355 with let you rev high, but the stock heads will def hold you back with almost whatever cam you decide.
|
agreed. unless you don't mind spinning to 6700ish, i wouldn't use that cam. LE or AI are great for top ends and custom cam grinds. without good flowing heads, you will be choking the motor alot. you could just do a stout top end for now with aftermarket or stock ported heads and make great power on a stock bottom end. get a cam that peaks around 6-6200 and have some fun!