NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

1QWIKBIRD · 11-09-2009, 06:12 PM

I had a stock rocker spill its guts into the motor. There are 33 needle bearings per side of each rocker arm. I only found 29 so I had to pull the motor and tear it apart to find the other 4. I then made the switch to Comp Cams Pro Magnums rockers. Full roller, adjustable with guideplates and have performed flawlessly on the street, track, autox, trackday etc......I wouldn't ever put a stock rocker back on, unless it had the aftermarket conversion done. I feel your pain pulling the motor to find all the pieces....been there done that.

Stock LS1 parts FTMFL tooooooo

http://www.cardomain.com/ride/2446297/2

Chris

11-09-2009, 06:12 PM	#27
1QWIKBIRD 11 Second Club Join Date: Nov 2005 Location: Hamilton Twp, NJ Posts: 855 iTrader: (5)	I had a stock rocker spill its guts into the motor. There are 33 needle bearings per side of each rocker arm. I only found 29 so I had to pull the motor and tear it apart to find the other 4. I then made the switch to Comp Cams Pro Magnums rockers. Full roller, adjustable with guideplates and have performed flawlessly on the street, track, autox, trackday etc......I wouldn't ever put a stock rocker back on, unless it had the aftermarket conversion done. I feel your pain pulling the motor to find all the pieces....been there done that. Stock LS1 parts FTMFL tooooooo http://www.cardomain.com/ride/2446297/2 Chris __________________ 1999 Formula 6spd (The driver) 1997 2500 Ext. Cab Dodge 4x4 CTD 5spd (The Earth Mover) 1970 Nova 5spd (The toy) Last edited by 1QWIKBIRD; 11-09-2009 at 06:15 PM.