yeah i was looking at the JE's, they seem quite nice.
Quote:
Originally Posted by S.J.SLEEPER
nitrous likes compression, its all about the fuel/octane & supply. along with where the ringlands are located @ & there gap.
the larger the shot the lower the rings should sit on the piston to reduce the chance of meltin along with the ring gap needs to be larger.
i ran 12:1 compresion 383 stroker with ringlands set at 450thnds down and gap set @ 28-30thnds.
pushed a 350hp shot via direct port inj.
also you don't want the nos to come on til about 3600-4000rpms
otherwise you could rattle the motor
|
i have a window switch for the last part. was kinda thinking about a standalone, but at the same time it seems like it could be a little excessive. if i go direct port then yes. if i don't and only do a nitro dave's plate which is what i'm really leaning towards, then i would want to stay with a line from the fuel rail.