Quote:
Originally Posted by 01ws6TA
The measurements for the lca are 42-1/4 from inside of the lca mounts and 48" to the outside of the mounts, and 40" from center to center of the spring perch mounts.
length of the rear is 61" from rotor hat to rotor hat that's the very most outside measurment witch is 4" narrower than a stock 10 bolt
http://www.ls1tech.com/forums/gears-...8-8-build.html |
thanks for the link, VERY good info.
I can get just about all the mustang rear parts for free from my backyard and from my friends(mustang fanatics) who'd love the fact im putting it in an f body.
i just dont like his "ladder bar" type setup using only the lower LCAs. IMO too much stress on that bottom point. I would use the F body LCAs, but still use the Mustang style upper control arms, adjustable of course. Thats where an extra mount/crossmember on the body would come into play.