NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Whoboy580 · 07-28-2010, 01:13 PM

I have a slightly used (properly broken in (30mins) and 15 miles driving)
Cam is Trick Flow® Track Max® Camshafts for Small Block Chevrolet (TFS-31401002) Cam is Hydraulic flat tappet with RPM Range 3,500-6,500 ,
Duration at 050 inch Lift 246 int./254 exh. , Advertised Duration 308 int./316 exh. Valve Lift with Factory Rocker Arm Ratio 0.510 int./0.518 exh. lift
Lobe Separation (degrees) 112 Asking 70.00 obo

I also have used lifters if anyone is interested. They are Trick Flow® Hydraulic Flat Tappet Lifters (TFS-21400001)Lifter Outside Diameter (in) 0.842 in.
It is a set of 16. They were used with cam listed it above. Asking 30.00 obo

Located in National Park, NJ 08063

07-28-2010, 01:13 PM	#1
Whoboy580 Join Date: Feb 2006 Location: Wenonah Posts: 118 iTrader: (0)	Trick Flow Cam and Lifters I have a slightly used (properly broken in (30mins) and 15 miles driving) Cam is Trick Flow® Track Max® Camshafts for Small Block Chevrolet (TFS-31401002) Cam is Hydraulic flat tappet with RPM Range 3,500-6,500 , Duration at 050 inch Lift 246 int./254 exh. , Advertised Duration 308 int./316 exh. Valve Lift with Factory Rocker Arm Ratio 0.510 int./0.518 exh. lift Lobe Separation (degrees) 112 Asking 70.00 obo I also have used lifters if anyone is interested. They are Trick Flow® Hydraulic Flat Tappet Lifters (TFS-21400001)Lifter Outside Diameter (in) 0.842 in. It is a set of 16. They were used with cam listed it above. Asking 30.00 obo Located in National Park, NJ 08063