|
Ummm I'm not looking to start any wars here but $400 in materials is cheap materials. They may look good right out of the gun but most likely won't hold up over time. They'll fade and possibly even crack or yellow on you.
Also if you were using PPG DP Epoxy Primer I believe it tells you right in the instruction manual that you cannot put basecoat right over it....but I could be mistaken.
__________________
--==RPM Resto & Custom==--
1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
|