If you can wait until the 26 when im in town i can give you a hand.
I believe the LT1 and 98 LS1 pumps are the same. If so, the pump part is easier then the harness part. pop the old pump out of the housing, put the new pump in the housing. Took me 2 mins for the pump swap. Did it in a hotel parking lot at 11pm after work one night. The harness part took me a little longer to do. They gave me a safety pin with the kit instead of a paper clip so getting the wires out of the connector was a PITA. other than that, took a little over an hour with hardly any light.
__________________
Mike
Red 98 Z28
TGMS A4, 224 Cammed LQ9, Borla Catback, MSD wires, Summit 3.73 gears
12.06 @ 113.04 mph 1.66 60 ft
|