NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

dpmalibu · 01-08-2011, 04:48 PM

--------------------------------------------------------------------------------

just like title says I just got another 84 Z/28 for parts. This one is not going to get stripped down too much b/c I plan on selling most of it as a roller as soon as I get the title. It has a 91 nose, high rise spoiler and ground efx on it. It is very solid. Floors,1/4's, trunk area, pass. door, fenders are all solid.It is a T-top car w/ sub frame connectors and an Competition Engineering 8pt roll cage. The rear is a stock open diff 10 bolt. The dash pad is almost perfect other than a hole drill in the middle for the tach wire. It has a digital dash (don't know if that is stock or out of a T/A). The interior has a stock console with a B+M mega shifter. It has (1) plastic racing bucket seat.

Here is a list of the exterior parts that are for sale:

1) Harwood 4" bolt on cowl hood in perfect shape $425

2) (4) 17x8" SLP chrome 5 spoke wheels w/ tires and 2" spacers. (Wheels are almost perfect other than one wheel is peeling. No curb rash. Tires have a lot of tread but has some dry rot). $500

3) Tail light covers (have to check condition) $20

4) Headlight covers (have to check condition) $15

5) Edelbrock STB for Carb/TBI

Interior parts for sale:

1) B+M Console Megashifter for T-350 $85

2) Almost perfect dash pad w/ hole drilled in middle for tach wire to run thru $95

3) Plastic racing buckets w/ seat track $40

4) Autometer 5" tach $100

5) triple gauge (oil press, water temp, volts) $20

Drivetrain parts:

1) T-350 manual reverse valve body has approx. 6-8k miles $500

2) Custom mandrel bent Mufflex exhaustw/ headers : has custom 3" Y-pipe which goes into a 4" intermediate pipe into a Spintech muffler w/ dual 3" tailpipes. Unknown shorty headers Ii'll have to check them) $500

3) another set of shorty headers $95

4) mini starter dual bolt pattern (don't know brand $75

5) MSD 6AL $125

6) MSD HEI distributor $80

7) 3 core radiator $85

8) Electric fan ( I beleve it's 16" but I'll measure it) $60

9) Carter 750 carb (heavily oxidized. been sitting awhile) needs rebuild $75

I'll start looking at this stuff and closely checking out condition in next day or so before it snows again.

Located in Hatboro,Pa

Pics:

01-08-2011, 04:48 PM	#1
dpmalibu Join Date: Mar 2009 Location: Hatboro,PA Posts: 18 iTrader: (4)	Another 84' Z/28 for parts -------------------------------------------------------------------------------- just like title says I just got another 84 Z/28 for parts. This one is not going to get stripped down too much b/c I plan on selling most of it as a roller as soon as I get the title. It has a 91 nose, high rise spoiler and ground efx on it. It is very solid. Floors,1/4's, trunk area, pass. door, fenders are all solid.It is a T-top car w/ sub frame connectors and an Competition Engineering 8pt roll cage. The rear is a stock open diff 10 bolt. The dash pad is almost perfect other than a hole drill in the middle for the tach wire. It has a digital dash (don't know if that is stock or out of a T/A). The interior has a stock console with a B+M mega shifter. It has (1) plastic racing bucket seat. Here is a list of the exterior parts that are for sale: 1) Harwood 4" bolt on cowl hood in perfect shape $425 2) (4) 17x8" SLP chrome 5 spoke wheels w/ tires and 2" spacers. (Wheels are almost perfect other than one wheel is peeling. No curb rash. Tires have a lot of tread but has some dry rot). $500 3) Tail light covers (have to check condition) $20 4) Headlight covers (have to check condition) $15 5) Edelbrock STB for Carb/TBI Interior parts for sale: 1) B+M Console Megashifter for T-350 $85 2) Almost perfect dash pad w/ hole drilled in middle for tach wire to run thru $95 3) Plastic racing buckets w/ seat track $40 4) Autometer 5" tach $100 5) triple gauge (oil press, water temp, volts) $20 Drivetrain parts: 1) T-350 manual reverse valve body has approx. 6-8k miles $500 2) Custom mandrel bent Mufflex exhaustw/ headers : has custom 3" Y-pipe which goes into a 4" intermediate pipe into a Spintech muffler w/ dual 3" tailpipes. Unknown shorty headers Ii'll have to check them) $500 3) another set of shorty headers $95 4) mini starter dual bolt pattern (don't know brand $75 5) MSD 6AL $125 6) MSD HEI distributor $80 7) 3 core radiator $85 8) Electric fan ( I beleve it's 16" but I'll measure it) $60 9) Carter 750 carb (heavily oxidized. been sitting awhile) needs rebuild $75 I'll start looking at this stuff and closely checking out condition in next day or so before it snows again. Located in Hatboro,Pa Pics: Last edited by dpmalibu; 02-08-2011 at 02:53 PM.