|
you should hear/fell 2 to 3 clicks when installing the converter.
you should also not be able to put your finger behind bell & converter, that will tell you its seated all the way.
Normally you will have 3/16" to 1/4" gap between flywheel mounting surface & torque converter mounting surface when trans is bolted tight. then pull converter lightly foward til touching, then install all tc bolts in by hand, than tighten to spec.
__________________
Quote:
Originally Posted by SRGN
I never pulled into the staging beams at the track and saw a dyno in the other lane.
|
South Jersey Racecraft
|