NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - goodbye bubbling sail panel, hello ghetto (tons of pictures)

creeper · 07-27-2011, 10:00 PM

I used a 12" long prybar to remove the one off of my car and it was still a chore, that windshield urethane is really tough stuff. A heat gun would work if you chopped away the 2 or 3 extra layers of structural sheet metal from the inside and then pulled as you heated it but I didn't have any cut off wheels so I used the guitar string method which was a huge PIA

07-27-2011, 10:00 PM	#15
creeper Join Date: May 2008 Posts: 817 iTrader: (3)	I used a 12" long prybar to remove the one off of my car and it was still a chore, that windshield urethane is really tough stuff. A heat gun would work if you chopped away the 2 or 3 extra layers of structural sheet metal from the inside and then pulled as you heated it but I didn't have any cut off wheels so I used the guitar string method which was a huge PIA __________________ \|2000 Trans Am\|T56 swap\|Bolt Ons\| Suspension\|