|
I replaced the hinges on my car. Originally went in just to replace the pin and bushings but the hinge around the bushings was worn, when I put the new bushings in they were just as bad as the old ones.
Spoke with a friend at a body shop and he recommended zapping a weld at the edge of the bushing/hinge. I did that on my passenger door and it tightened up the bushing enough to fix all the play in the door.
If your in the Burlington City area I have a handfull of pins and bushings if you still want to replace them. I would not recommend trying to replace the hinges. That was a big PITA, unless you have body experience (I do not).
|