My pistons should be coming in by the end of this week. Motor will be going out to the machine shop.
Quick question, what size shot of nitrous can I run with the following setup:
LE 234/238 .612"/.612" 111 LSA
Trickflow 21* 185 heads
Probe SRS pistons (2618) - Thicker nitrous deck, top ring seated lower... details in link below:
(
http://www.probeindustries.com/Produ...Show=TechSpecs)
Callies Compstar H-beam (4340/5.7/3.48) rods
Stock Crank (4 bolt main)
Anywhere from 11.6-12.2:1 static compression
I'm willing to run a nitrous dedicate fuel system. Gotta figure out what size shot of nitrous to have the rings filed for. Any ideas? Bigger the better... as long as it's on the safe side to run.