Another failed inspection thread
So I failed inspection this morning. I haven't had a chance to look at anything yet so keep that in mind. I am going to start with checking the plugs, wires, cap, rotor, the timing, OHMing out the CTS and going from there. Here are the results from this monring.
Test: Idle, Status: Fail
Reading - Standard
HC ppm 1846 - 220
CO% 0.58 - 1.20
CO2% 10.1
O2% 6.0
Test: High Idle, Status: Pass
Reading - Standard
HC ppm 147 - 220
CO% 0.12 - 1.20
CO2% 12.2
O2% 3.3
Needless to say GTA = Fail at the moment
Suggestions are welcome
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
Last edited by greenformula92; 05-24-2012 at 07:48 PM.
|