Quote:
Originally Posted by L695speed
Ok so I could get away with not running it.
Stevoone, the factory cooler is basically running coolant to an adapter that the oil filter screws into. So its using the coolant in the radiator to keep the oil cool by running it through the adapter. Similar concept to a heater core, except it cooling instead of heating.
|
That makes sense now. The picture showed the oil adapter/cooler with two hoses but only one going to the radiator, I've never seen one run like that before.
The cooler is discontinued but the part number was 14092135
Here is an adapter to run a remote cooler.
http://www.jegs.com/i/Trans+Dapt/969/1322/10002/-1