Quote:
Originally Posted by MyFirstZ
Yeah you will have holes all along the Rockers and rust spots where the mount go.
|
As mentioned above the side skirts on the rockers have rectangle shaped brackets with a hook/lip on top that the side skirts hang on that are riveted on to the rocker panel.
It has been 3 years or so since I removed mine but from what I remember there was 8-12 brackets every 10 or so inches riveted on each side.
I had push tree's sprayed with matching paint to temporarily plug the holes until I had them filled.
The 2 front pieces and rear valance also use just a couple of those same brackets too.
The side skirt is easy to remove if you want to look at the brackets and how many holes you will be looking at.
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
|