NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

TAdan · 08-27-2012, 09:20 AM

Hi, I am looking at swapping a GM Goodwrench 350 longblock p/n 10076353 into my 84 T/A to replace the stock 305 (LG4).

I plan on reusing my stock ccQ-Jet, aircleaner & factory cowl induction, and EGR setup.

My LG4 intake was warped in the past and the water neck bolts have been helicoiled, so it would be best to go for a new intake.

I plan on running a fairly mild set up so I am just looking for something that can directly replace my LG4 intake and keep the stock hood clearances.

I am looking at the GMPP ZZ4 (#10185063) intake manifold and the Edelbrock Performer (#3701). Will these two give the me OEM clearances i am looking for?

Thanks for any assistance.

08-27-2012, 09:20 AM	#1
TAdan Join Date: Jan 2007 Location: Warren, NJ Posts: 332 iTrader: (3)	Which intake manifold for a 350 swap. Hi, I am looking at swapping a GM Goodwrench 350 longblock p/n 10076353 into my 84 T/A to replace the stock 305 (LG4). I plan on reusing my stock ccQ-Jet, aircleaner & factory cowl induction, and EGR setup. My LG4 intake was warped in the past and the water neck bolts have been helicoiled, so it would be best to go for a new intake. I plan on running a fairly mild set up so I am just looking for something that can directly replace my LG4 intake and keep the stock hood clearances. I am looking at the GMPP ZZ4 (#10185063) intake manifold and the Edelbrock Performer (#3701). Will these two give the me OEM clearances i am looking for? Thanks for any assistance. __________________ 1984 Trans Am (And a few more) The 1982-1984 Firebird Zone: www.early3rdgen.com/forums Last edited by TAdan; 08-27-2012 at 01:15 PM.