Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
Drain the fuel tank. Refer to Fuel Tank Draining Procedure.
Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
Disconnect the quick-connect fitting at the fuel filter.
Disconnect the fuel return pipe quick connect fitting.
Remove the rubber exhaust hangers. Allow the exhaust system to rest on the rear axle.
Remove the exhaust heat shield.
Loosen the fuel filler hose clamp at the fuel tank.
Disconnect the fuel filler hose from the fuel tank.
Disconnect the evaporative emission (EVAP) vapor pipe from the EVAP canister.
Disconnect the electrical harness from the multi-way rear body connector and fuel strap.
With the aid of an assistant, support the fuel tank (1).
Disconnect the fuel tank retaining straps.
Lower the fuel tank.
Remove the fuel sender assembly from the tank.
I'd pull the backseat/trunk carpet and make sure there isn't an access hole first.
|