|
i have a complete motor. just did a leak down test and they were all 15-20% which isnt to shabby for a junk yard engine. i pulled one rod cap last night and it looked great. my budget is about $1500 for an over haul. do you guys think that is achievable. im looking to have the block hot tanked, checked for cracks or defects, and dressed for rebuild. all new bearings, rings and seals. whatever needs to be done to the crank. reuse the rods and possibly the pistons. have the heads cleaned and gone through. a total stock rebuild. no performance stuff like head porting. i this it is doable at $1500 reusing most major parts. keep in mind its going in my daily driver 04 sierra 2500hd
|