NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - 1988 Firebird Formula being parted out drivetrain parts

dpmalibu · 02-16-2014, 10:22 PM

Rear sold.

More info on motor. 305 bored .030 over (you can still see cross hatch marks on cyl walls). Speed Pro hypereutectic flat top pistons. Comp ratio w/ 64 cc chamber heads was 8.39:1. Flat tappet cam specs unknown. Inside of motor is very clean. Still need to check bottom end to see what components were used. Should know more tomorrow. Motor ran good. No smoke.

02-16-2014, 10:22 PM	#2
dpmalibu Join Date: Mar 2009 Location: Hatboro,PA Posts: 18 iTrader: (4)	Rear sold. More info on motor. 305 bored .030 over (you can still see cross hatch marks on cyl walls). Speed Pro hypereutectic flat top pistons. Comp ratio w/ 64 cc chamber heads was 8.39:1. Flat tappet cam specs unknown. Inside of motor is very clean. Still need to check bottom end to see what components were used. Should know more tomorrow. Motor ran good. No smoke. Last edited by dpmalibu; 02-17-2014 at 09:02 AM.