So, I am in the process of changing platforms... that means, all the stuff needs to go.
All parts are for a 98-02 Camaro/Fbody or LSX platform if not a specific part.
Moser 9" rear, 3.70 gear, 35 spline axles, spool, welded backbrace, wolfe dragbar, 1/2" extended studs, comes with LS style backing plates with LS rear calipers that are ground down to fit weld wheels, with brake lines. $2200
TH400 built by Transmission specialties, RMVB, trans brake, rated to 850 HP, large sprag, new clutches, rollerized output, deep pan, new never installed Included is 20 quarts of type F trans fluid. $1400
3" alum drive shaft with 1350 u-joint made for a TH400/9" rear. $250
Edelbrock Vic Jr. intake for L92/LS3 style heads, powdercoated gloss silver(looks chrome) $325
Edelbrock medium profile elbow painted gloss black/clear coated(Infiniti Black obsidian) $115
Comp 224/224 588/588* 114 LSA cam about 6,000 miles $275
Borla adjustable catback has been run and removed, nothing cut, no plates $450
Camaro rear hatch thats gutted, gets pinned closed, Percys lexan rear glass, comes with pins and mounts, painted Artic white, no spoiler. Will accept a SS or Z28 spoiler no problem. $400
Wolfe bolt in 6 point bar, mild steel powdercoated black. Never tested. Rear bars go through speaker grills(have cut speaker grills to fit bars) $600
99-02 Camaro cluster with a Macewean white faced overlay 82XXX miles $100
Nitrous outlet dedicated fuel system for fuse area,
Quote:
|
Nitrous Outlet's dedicated fuel systems come complete with a custom built plastic 1 gallon fuel cell, mounting brackets, Walbro in tank fuel pump, Aeromotive fuel regulator, Aeroquip 6 An hose, fuel lines, and fittings.
|
New never installed or had fuel in it $500
Nitrous outlet stinger plate conversion with jets, braided lines, noid brackets, new never opened $370
Aeroforce scan gauges, pair of red guages, with black faced dials. $290
Pair of front 2000 Z28 camaro cloth seats, no rips or no seat tracks $40
QA1 front coilovers with 275# springs, Q1A rear shocks, single ajdu $550 for the set of 4
4" cowl hood for Camaro, I think its a Harwood, bolt on style, Still in black gelcoat. Slight cracking on the gelcoat but this never bothered me as I was going to paint it. Prior owner said the nut came loose on the hinge and had to add new. $550
TH400 crossmember from UMI for a conversion swap. $125
PTC built converter for a TH400 to a LS style motor. ~4200 RPM stall, new never ran $500
Racestar 'dark stars' 15x3.5/15x10 with proper Fbody backspacing. Mounted are 165/85/15 Nankand radial fronts, rears are 275/60R15 ET street pros, wheels & tires have only about 50 miles on them, mint no damages at all. $1100
Some parts like the cage and rear are still installed in the car and I can pull it out as soon as possible.
I have some STL beacons, strobe lights. They are very bright and are good for snowplowing/security. I have 3 Amber, 1 white. One of the amber lights have been opened and used this winter. $35 each.