View Single Post
Old 04-08-2015, 12:23 PM   #13
V
Stalker
 
V's Avatar
 
Join Date: Aug 2004
Posts: 12,082
iTrader: (12)
98-02 Camaro headlight bracket, Right side only, $30
98-02 Camaro front fender/bumper bracket, Right side only, $30
1998 front bumper, has a small tear up top, car went under a truck, $40
1998 driver side headlight, foggy and needs refinishing(polished/buffed), $20
1998 Drivers fender, lower mounting tab(behind wheel) broken off, $20

That would all come to $140.
Like I mentioned the bumper cover has a tear on the top, I'll get a picture tomorrow and the drivers fender has the lower tab broken off the bottom.

As for metal, I still have the car shell on my trailer, how much of the metal framework would you need? Like from where to where?

I could cut down the middle on the rad support up front and then at the middle of where the front tires sits(like middle of the fender). That'd be $100.(from the '98 z28)
With that whole section, the body shop should be able to dissect exactly what they want.
The area of the frame "rail" further back where the fender meets the door is rusty.

There is some rust on areas of the 98 camaro shell so I can't promise anything till I look closely at the area you need, but I also have a '02 Formula with a great condition metal body that I could also cut the metal from. The front frame/nose structure support between the LS1 birds and camaros should be the same. I would check them out and confirm that first though.


Last edited by V; 04-08-2015 at 12:28 PM.
V is offline