NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

MDSheds_SS · 04-26-2015, 11:44 AM

You can cut the sheet metal right above the top of the fuel tank. The pump is right there easy to pull out and replace/repair. There are a bunch of YouTube links that will show you the exact place to cut and exactly how to do it. I did it on my car and had the pump out and back in within 2hrs. I also ran the racetronics hot wire kit and was able to make all the connections right there. Some guys may not approve of this but if you take your time and do it right you won't have any issues.

04-26-2015, 11:44 AM	#3
MDSheds_SS 11 sec club Join Date: Aug 2014 Location: Woodbridge Posts: 834 iTrader: (1) Social Networks:	You can cut the sheet metal right above the top of the fuel tank. The pump is right there easy to pull out and replace/repair. There are a bunch of YouTube links that will show you the exact place to cut and exactly how to do it. I did it on my car and had the pump out and back in within 2hrs. I also ran the racetronics hot wire kit and was able to make all the connections right there. Some guys may not approve of this but if you take your time and do it right you won't have any issues. __________________ 99 Z28 Trick Flow 215s milled to 61cc 228/232 Cam Fast 102 built 4l65e trans 4000 converter 12 bolt 410s Electric WP deleted PS/AC Dyno & Track tuned 2015 ATS Coupe. AWD 2.0 Turbo 2012 2500hd Silverado with LTZ 20s on 35x12.5x20 86 Buick GN Lesabre 1 of 117 (4-Sale)