Quote:
Originally Posted by sweetbmxrider
Didn't you say you commanded them on with the scanner and they worked? You have to be a little clearer with what you post up info wise, its not easy diagnosing over the internet
Best way to check coolant sensor is to let the car sit overnight so the coolant reaches ambient (air) temp. You then read the datastream and compare the coolant temp with the intake air temp. They should be within 4 degrees of each other. You can then let the car warm up and see if the pcm commands low and high speed fan operation at their respective turn on temps.
|
I did command it with my scanner but it's possible there is a short somewhere