NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - 99-02 Camaro Roller

MDSheds_SS · 09-07-2016, 03:22 PM

I had a stick roller and tried to make it with a 60e and it was a pain in the ass. We got it to work but the hole for the 6 speed is to big for the auto shifter. You have to weld a plate over the hole or the shifter will only be supported by the rear 2 bolts. If I make the swap its gotta be an auto shell. Only looking because I'm pulling the motor out and figure now would be the time to color coordinate the rig and racecar.

09-07-2016, 03:22 PM	#4
MDSheds_SS 11 sec club Join Date: Aug 2014 Location: Woodbridge Posts: 834 iTrader: (1) Social Networks:	I had a stick roller and tried to make it with a 60e and it was a pain in the ass. We got it to work but the hole for the 6 speed is to big for the auto shifter. You have to weld a plate over the hole or the shifter will only be supported by the rear 2 bolts. If I make the swap its gotta be an auto shell. Only looking because I'm pulling the motor out and figure now would be the time to color coordinate the rig and racecar. __________________ 99 Z28 Trick Flow 215s milled to 61cc 228/232 Cam Fast 102 built 4l65e trans 4000 converter 12 bolt 410s Electric WP deleted PS/AC Dyno & Track tuned 2015 ATS Coupe. AWD 2.0 Turbo 2012 2500hd Silverado with LTZ 20s on 35x12.5x20 86 Buick GN Lesabre 1 of 117 (4-Sale)