Yeah I would try adjusting the dimmer to see if anything changes like bls is implying.
Headlamp switch should be 10 pin, 3 on the top and 7 on bottom. If you unplug the connector and look at the pin side, the top right pin would be the brown wire that feeds the parking lamps. There should be two pins to the right of the locking tab for the connector. There should be a brown wire off of the 4 pin dimmer switch too, its the far right when looking at the pin side tab up.
Last edited by sweetbmxrider; 05-31-2018 at 06:38 PM.
|