US Gears 3.55 ratio ring and pinion set. I used this for 2 years in the car with my moser 12 bolt rear. They never gave me a problem, but for racing I went to a 3.91 gear ratio so these 3.55s came out. Hardly any wear. this is the link with the specs and they sell for $300 new
I am selling them for $120. (You will need to buy the shim/bearing kit)
Modified OEM camaro IROC-Z tail lights. These were the original ones on my car. I peeled them apart about 10 years ago and did the red tail-light mod with the translucent candy red paint inside the lens to eliminate the orange turn-signal color. This is 100% legal in New Jersey. . They are NOT painted on the outside of the lens, so with some plastic polish and elbow grease, you can get them to shine. I had installed a battery kill-switch into the separate black plastic piece on the passenger side, so there are some drill holes from that, but I know you can replace the black plastic at a cheap price.
$150 for both lights as seen
OEM TPI fuel pressure regulator complete
$20
OEM camaro lug nuts, keyed lugs (with key), and some oem lug studs:
$20 for all of it
Those little plastic dress covers that go under the oem style seats to hide the metal seat brackets:
$10 for all of em
I forget what this was for, some type of vacuum distribution block for TPI?
$5