will my loudmouth connect to the QTP ypipe without modification? - NJFBOA - Home of New Jersey's Camaros and Firebirds

jimmyboy8301 · 03-13-2007, 12:07 AM

I have the loudmouth and am seriously considering QTP headers with their catted ORY pipe. Will the ORY mount up to the loudmouth without any or major modification?

GrandmasterCow · 03-13-2007, 01:39 AM

wouldn't it all match up and jsut be able to either clamp or weld it in place ?

JSPERFORMANCE · 03-13-2007, 08:23 AM

it should line up without too much adjustment..

ar0ck · 03-13-2007, 09:01 AM

You may just have to trim a little off the I-pipe from your loud-mouth. But yes it will connect without any problems. After you have your y-pipe together I would recommend you have someone weld it when its nice & tucked in.

Batman · 03-21-2007, 06:39 AM

Yeah QTP has a very long, Big Y-pipe. I really wasn't happy with mine. Loved the headers, hated the Y-pipe. You do have to cut down the I-pipe because it will be too long. My suggestion is get yourself a set of Kooks instead, they fit great and the Y-pipe tucks right up against the body. I can get you picks when I get home if you want.

Rich189 · 03-21-2007, 07:15 AM

i thought u were goin with slp's

or did you read about how damn low they hang

foff667 · 03-21-2007, 12:17 PM

Quote:

Originally Posted by Rich189

i thought u were goin with slp's

or did you read about how damn low they hang

Yeah I warned him about it & gave him a link to what headers are highly reguarded.

Damn n00bs

NP_00'T/A · 03-23-2007, 02:42 AM

I have this setup and it didn't match up at all they had to cut and weld ****... kinda regret getting them now the y-pipe hangs way too low and bottoms out like its its job.... The headers are really good but the y-pipe kinds sucks bad if you have a lowered car you might want to return them because your going to have a lot of problems (i got 1 1/2 inch clearence on a stock ride height). The only good thing is it sounds like a absolute monster with both cutouts open