 |
10-19-2013, 10:37 AM
|
#1
|
Join Date: Sep 2010
Location: egg harbor twp south new jersey.
Posts: 229
|
what is a lt1 worth?
hey guys- gals, i am trying to get an idea what my lt1 is worth. it is a 95-96 out of a caprice police car 5.7 liter. it is complete top to bottom and has the serpentine accessorizes minus the ac compressor, it even has the exhaust manifolds. it had a slight knock at start up but i would assume a rebuild anyway. should i sell the serpentine separate, i have seen them sell for a couple hundred on ebay. i also have a 305 with a tuned port injection complete top to bottom it does have harmonic balance r and water pump pulley, i have not looked what year it is,. i personally sold the tuned port on ebay years ago, i dont remember how much but was up there. im just trying to get some advice on how to list them, complete or apart? thank for any help.
|
|
|
|
10-19-2013, 10:54 AM
|
#2
|
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
A scrap yard will give you about $.10/lb and a handshake
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
|
|
10-19-2013, 11:08 AM
|
#3
|
|
11 second club / Moderator
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
|
Cast iron heads on it right?
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57
1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
|
|
|
|
|
10-19-2013, 11:29 AM
|
#4
|
|
Stalker
Join Date: Aug 2004
Posts: 12,082
|
id say 200-250 for the lt1 if someone wants it for parts or the block. you get more splitting it all up. ie block rotating assembly, accessories, bolts etc.
the 305... 100 maybe if you find someone looking for a 305.
|
|
|
|
|
10-19-2013, 11:32 AM
|
#5
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,938
|
Scrap it or spray it down and store it for years
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
10-19-2013, 11:42 AM
|
#6
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,368
|
Doubt its worth much, especially if you disclose it is knocking. The block has "327" cast into the side, right?
|
|
|
|
|
10-19-2013, 06:24 PM
|
#7
|
|
13 Second Club
Join Date: Jul 2004
Location: Ewing/Galloway, NJ
Posts: 3,904
|
since its an old service vehicle engine it would need a rebuild anyway, because you know that thing was either idling or at full throttle for over 100k miles lol
__________________
EB
99 Riviera, Bone stock, 14.34 @ 96 "Walking 5.0's in luxury" RIP
95 Cherokee, Bone stock 16.2 @ 83 "Treeing your 3rd gen and beating it to the line despite trapping less....and looking better"
93 TA, Bone stock, 13.8 @ 100 "Beating ****** drivers in ****** LS1's"
https://www.facebook.com/groups/285090241699967/
R.I.P. Tia 
Last edited by Squirrel; 10-19-2013 at 06:24 PM.
|
|
|
|
|
10-20-2013, 07:34 AM
|
#8
|
Join Date: Sep 2010
Location: egg harbor twp south new jersey.
Posts: 229
|
Quote:
Originally Posted by deadtrend1
Cast iron heads on it right?
|
yes it does have the cast iron heads,.
thank you for the reply's, i was hoping for a little more than that. maybe ill just take it apart and sell the accessory's separately. i was going to do the rebuild and drop it in my chevelle but that would be to much to change.
|
|
|
|
|
10-20-2013, 07:53 AM
|
#9
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Probably $300 if the waterpump and opti are still good.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
