new motor combo

[camaroracer1992]

ok since my motor was toast i am building a new motor.
i am keeping my JE .030 pistons that i bought last year ($800 custom pistons)

hows this sound? im going to get a dart/world 350 block. eagle just came out with a 4.125 stroke crankshaft, figuring this with a 6.0 inch rod and a 4.030 bore it would get me about 420 cubic inches if i did the math correct.
i will be buying the brodix race rite cnc heads (200 cc). the camshaft i will be running is a comp cams nitrous with 113 LSA 240/253 with .507/.525 lift (which will be a little more since i have 1.6 rockers). will this motor be a good torque monster/hp or not? i am running the edelbrock PRO FLO EFI system 1000 cfm throttle body also. thanks

[NJSPEEDER]

you going with a 350 block? i know dart makes 400blocks too. 4.125 stroke with 4.125 bore would be 434 or something like that i think(too lazy to use calculator)
the combo sounds like it will be a killer set up. as long as it is all done by august 14th

later
tim

[camaroracer1992]

i know they make the larger one, but i dont want to ahve to buy new pistons, unless you know someone that needs these??? the car will be ready by then its getting dropped off on tuesday