| 
| 
	
		|  |  |  
	
	
		
	
	
	
		|  05-14-2014, 09:21 PM | #1 |  
	| Stalker   
				 
                                        
				Join Date: Aug 2004 
					Posts: 12,083
				     
                                    
                                 | 
				
				Spring cleaning sale!
			 
 
			
			I know it may be late for spring cleaning but hey, its not summer just yet.I have way too much stuff laying around so some of it, I hope most of it, needs to go.
 
 Prices are ALL "obo".  Nothing is set in stone but all prices are very fair and several time lower than you'd expect to see on ebay or such.  So don't want something for nothing, be reasonable.
 
 Also parts prices are based on condition too, I don't expect big bucks for rusty junk or even have the nerve to ask it.
 
 Now on to the parts.. ( just a fraction of the stockpile)
 98-02 camaro hood, pewter, $80
 93-02 camaro hatch, $35 (I got at least one with mint tint) no spoilers
 93-02 v6/z28 spoilers, $15
 93-97 camaro fenders $35 each
 98-02 camaro fender $50 each
 93-02 taillight finish panels $30
 93-02 camaro rear bumpers $40
 93-02 firebird/formula rear bumper $40
 93-97 camaro headlight bar $50
 93-02 camaro mirrors $40 set
 93-97 firebird/trans am mirrors $50 set
 98-02 FastToys(?) Ram air duct $20
 93-02 camaro/firebird abs light gray t-top headliner $45
 '99 and '00 Delco amplifiers $10 each
 '99 graphite leather rear seats, 3pc set $60
 '00 charcoal cloth seats full set $125
 93-02 convertible front headliner $40
 '01 factory rear springs, less than 10k miles(from my SS) $25
 93-02 (82-92) Hotchkis rear lowering springs $40
 '00 LS1 intake manifold $75
 93 camaro dash shell (lighter gray color) $50
 95 camaro dash shell $50
 94 Trans am/firebird dash shell (1 small crack be headlight switch area) $25
 '99 camaro dash shell, airbag deployment, use for Racecar! $10
 93-02 camaro convertible trunk lid $80
 93-02 camaro/firebird ttops, set $100, each $60
 93-02 camaro door sill plates $5 each
 '99 camaro graphite leather front pass seat rip on bottom but bolster ok, $20
 '99 camaro graphite leather front driver seat, torn and worm good for parts $10
 93-02 stock t5 shifter(v6)
 93-97 LT1 drivers side engine accessory bracket $50
 '99 3.8l 4L60e V6 107k miles, $50
 '94 3.4l 4l60e V6 122k miles $25
 '94 LT1 4L60e CORE, 3-4 slips, $25 (1 year only trans, so hard to find cores)
 93-02 camaro firebird side glass, w/ tint $25 each or w/o tint $20 each
 assorted 4th gen BARE door shells $40 each
 93-02 camaro/firebird windshield $75
 assorted light gray OR graphite interior trim panels $15 each,
 (buy more than one piece and I'll do package deals)
 93-02 camaro hardtop roof section(w/sail panel)(from '93) $200
 93-02 camaro ttop sail panel(from '98) $200
 93-02 camaro rear 1/4 panels $250 each
 93-97 LT1 engine k member $40 (suspension intact but no struts or brakes)
 '99 (96-02?) v6 engine k member $40 (suspension intact, no brakes)
 93-97 LT1 brakes $80 (set of 4 calipers only)
 93-97 cross drilled brake rotors $100
 '93 Trans am twist-style wheels, 2 only, tires shot $30 pr
 (may have another pair of wheels to make a set)
 '98 camaro 5 stock spoke wheels, with center caps, $150 set of 4(tires worn)
 '93 Camaro rear axle, LT1 t56 car, $125, no brakes
 not sure if 3 or 4 ch
 '94 Trans am rear axle, LT1 4L60e car, $80, no brakes damp with oil by pinion,
 not sure if 3 or 4 ch
 '98 Camaro z28 rear, LS1 T56 car, $150, no brakes
 not sure if 3 or 4 ch
 '94 Trans am fuel tank, metal, w/ good pump and sending unit $120
 c5 z06 wheels 2 only, chrome pitted bad, $40 pr
 
 95 s10/blazer steering column w/wheel and airbag(key included) $50
 95 s10/blazer rear flip up seats(2 door) $40
 95 s10/blazer dark gray headliner, (no sunroof) $50
 95 s10/blazer rear glass shocks(support struts) $10
 
 91 camaro driver fender OEM (82-92) black great shape $50
 91 camaro TBI intake manifold setup (no harness/ecm) $30
 '88 Low rise spoiler(like the 91-92 style but low (NOT the firebird spoiler) $75
 3 piece spoiler SIDE sections only $40 pr
 
 SBC TH-350 auto trans, running condition $40
 new chrome th350 dipstick $20
 SBC Crane solid roller lifters, great shape $100
 
 94-? (96/01) Dodge ram door panels, reg cab, NO power options $25pr
 94-01 dodge ram manual window regulators $40 pr
 
 OK... That's all I'll list for tonight, I could go on a lot more....
 In the next few weeks, I have to strip down my 93 Z28 and 98 z28 so if you think of any parts you may need from them, just ask.
 
				 Last edited by V; 05-14-2014 at 09:47 PM.
 |  
	|   |  |  
	
		
	
	
	
		|  05-15-2014, 05:05 PM | #2 |  
	| 
				 
                                        
				Join Date: Feb 2012 
					Posts: 1
				     
                                    
                                 | 
			
			Pm sent
		 |  
	|   |  |  
	
		
	
	
	
		|  05-15-2014, 05:32 PM | #3 |  
	| BadMod 
				 
                                        
				Join Date: Aug 2004 Location: hamilton, nj 
					Posts: 8,889
				     
                                    
                                 | 
			
			Hey Paul do you have any exterior ram parts?  A buddy picked one up with all the oem rust
		 
				__________________So much stupid, so little time. 
	Mercerville MotorSports, LLCQuote: 
	
		| 
					Originally Posted by 79CamaroDiva  It started before I drove your car. I just have to look at it the wrong way and your car poops parts. |  |  
	|   |  |  
	
		
	
	
	
		|  05-15-2014, 08:37 PM | #4 |  
	| 
				 
                                        
				Join Date: Jan 2013 Location: Washington Crossing, PA 
					Posts: 51
				     
                                    
                                 | 
			
			Any door bezels for a 00-02 camaro, ebony in color not gray. Thanks
		 
				__________________ 2000 Camaro SS M6 #6244 of 8913Got BOOST?
  |  
	|   |  |  
	
		
	
	
	
		|  05-15-2014, 08:50 PM | #5 |  
	| Stalker   
				 
                                        
				Join Date: Aug 2004 
					Posts: 12,083
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by Mike  Hey Paul do you have any exterior ram parts?  A buddy picked one up with all the oem rust |  mike, lol nah.  I did swap out my doors already but only due to damage, not rust, surprisingly only my rear bumper has and rust/rot.
 
stealth355tpi, sorry no ebony camaro interior parts
		 |  
	|   |  |  
	
		
	
	
	
		|  05-15-2014, 09:09 PM | #6 |  
	| ^^^Lover of bad cars^^^  Meet Coordinator 
				 
                                        
				Join Date: Aug 2007 Location: Whitehouse Station 
					Posts: 2,276
				     
                                    
                                 | 
			
			nice parts list, coulda used a rear a few months ago!
		 
				__________________1986 Honda VFR750  - 89.3HP to the wheel 
2017 SS M6  - Mods: Nothing Yet.
2026 Tesla Model Y  - lol
   |  
	|   |  |  
	
		
	
	
	
		|  05-15-2014, 09:10 PM | #7 |  
	| Stalker   
				 
                                        
				Join Date: Aug 2004 
					Posts: 12,083
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by ThoR294  nice parts list, coulda used a rear a few months ago! |  That's at most maybe a 1/4 of what I have. lol
		 |  
	|   |  |  
	
		
	
	
	
		|  05-16-2014, 05:40 AM | #8 |  
	| 11 Second Club 
				 
                                        
				Join Date: Feb 2008 Location: Edison, NJ 
					Posts: 4,620
				 | 
			
			
	Quote: 
	
		| '98 Camaro z28 rear, LS1 T56 car, $150, no brakes not sure if 3 or 4 ch
 |  backing plates included?
		 
				__________________1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
 
 2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
 
 2006 GTO, 11.48 @ 118.3
 |  
	|   |  |  
	
		
	
	
	
		|  05-16-2014, 12:15 PM | #9 |  
	| Mongo the Meet Coordinator 
				 
                                        
				Join Date: May 2008 
					Posts: 16,941
				     
                                    
                                 | 
			
			LT1 or LS1 fans?
		 
				__________________ 
	Quote: 
	
		| 
					Originally Posted by KirkEvil  repo bigals turd gen and part it out to a loving home |  |  
	|   |  |  
	
		
	
	
	
		|  05-16-2014, 04:56 PM | #10 |  
	| Stalker   
				 
                                        
				Join Date: Aug 2004 
					Posts: 12,083
				     
                                    
                                 | 
			
			Chris, the 98 LS1 rear will not come with the backing plates. They are available though for an extra $50.  Otherwise they'd sell with the LS1 brake setup.
 I have to check all the rears this weekend to see which have TC and which don't.
 
 Matt, I should have 1-2 of each, some 4th gen v6 dual fans too.
 |  
	|   |  |  
	
		
	
	
	
		|  05-16-2014, 08:21 PM | #11 |  
	| ^^^Lover of bad cars^^^  Meet Coordinator 
				 
                                        
				Join Date: Aug 2007 Location: Whitehouse Station 
					Posts: 2,276
				     
                                    
                                 | 
			
			You have a torque arm and manual trans xmember? Lt1 t56 style?
		 
				__________________1986 Honda VFR750  - 89.3HP to the wheel 
2017 SS M6  - Mods: Nothing Yet.
2026 Tesla Model Y  - lol
   |  
	|   |  |  
	
		
	
	
	
		|  05-17-2014, 06:28 AM | #12 |  
	| 
				 
                                        
				Join Date: Jan 2013 Location: Washington Crossing, PA 
					Posts: 51
				     
                                    
                                 | 
			
			Any gears? Not the whole rear. Looking for some stock 3.23 gears
		 
				__________________ 2000 Camaro SS M6 #6244 of 8913Got BOOST?
  |  
	|   |  |  
	
		
	
	
	
		|  05-17-2014, 08:30 AM | #13 |  
	| 
				 
                                        
				Join Date: Mar 2009 Location: Hatboro,PA 
					Posts: 18
				     
                                    
                                 | 
			
			where are you located? I am interested in one of the rears
		 |  
	|   |  |  
	
		
	
	
	
		|  05-17-2014, 11:38 AM | #14 |  
	| 11 Second Club 
				 
                                        
				Join Date: Feb 2008 Location: Edison, NJ 
					Posts: 4,620
				 | 
			
			
	Quote: 
	
		| 
					Originally Posted by V  Chris, the 98 LS1 rear will not come with the backing plates. They are available though for an extra $50. Otherwise they'd sell with the LS1 brake setup.
 |  
If you can live without the backing plates, I'll take them on the rear.
  
Also the ram air set up, if you have a picture?
		 
				__________________1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
 
 2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
 
 2006 GTO, 11.48 @ 118.3
 |  
	|   |  |  
	
		
	
	
	
		|  05-18-2014, 09:12 AM | #15 |  
	| 
				 
                                        
				Join Date: May 2009 Location: Highland Mills, NY 
					Posts: 1,915
				 | 
			
			That driver seat you have manual rails?
		 
				__________________ 2000 Camaro SS 610rwhp/570rwtq LS2 440, 12 bolt 3.73, tranzilla t56
				 Last edited by MyFirstZ; 05-18-2014 at 09:12 AM.
 |  
	|   |  |  
	
		
	
	
	
		|  06-04-2014, 10:54 AM | #16 |  
	| Stalker   
				 
                                        
				Join Date: Aug 2004 
					Posts: 12,083
				     
                                    
                                 | 
			
			Sorry for the delay in the past 2 weeks, Life has been hectic and surprising.
 I still have all the parts and I'll get back to everyone about parts as soon as I can.
 
 One thing about the 93 and 98 rears, they are still under the cars and I don't have a definite idea as of right now as to when Ill be able to pull them.
 |  
	|   |  |  
	
		
	
	
	
		|  06-04-2014, 04:25 PM | #17 |  
	| 
				 
                                        
				Join Date: Apr 2008 Location: Morris County, NJ 
					Posts: 538
				     
                                    
                                 | 
			
			The seats from the 2000, is that just the front buckets or rear too? Saw it said full set, but just confirming... Condition/damage/tears/stains? any pics? C
		 
				__________________355 & Supercharged ...    Another trip inside the acid bath..no salvation and the grave is coming fast..
				 Last edited by RiggsLW81; 06-04-2014 at 04:27 PM.
 |  
	|   |  |  
	
		
	
	
	
		|  06-04-2014, 07:57 PM | #18 |  
	| Resident Camera Guy   
				 
                                        
				Join Date: Aug 2004 Location: North Jersey 
					Posts: 10,971
				 | 
			
			Paul, do you have Spindles from a 98+ Car with the brake hardware? Pads/Rotor condition doesn't matter.
		 
				__________________   |  
	|   |  |  
	
		
	
	
	
		|  06-13-2014, 09:49 AM | #19 |  
	| Mongo the Meet Coordinator 
				 
                                        
				Join Date: May 2008 
					Posts: 16,941
				     
                                    
                                 | 
			
			Price on LT1 fan setup?
		 
				__________________ 
	Quote: 
	
		| 
					Originally Posted by KirkEvil  repo bigals turd gen and part it out to a loving home |  |  
	|   |  |  
	
		
	
	
	
		|  06-13-2014, 10:30 AM | #20 |  
	| Meet Coordinator 
				 
                                        
				Join Date: Jan 2008 Location: brick/pt. pleasant beach 
					Posts: 19,370
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by ar0ck  Paul, do you have Spindles from a 98+ Car with the brake hardware? Pads/Rotor condition doesn't matter. |  I'm sure he does but I know Kirkevil does as well with I believe hawk pads and stainless lines if it doesn't work out.
		 |  
	|   |  |  
	
		
	
	
	
		|  06-13-2014, 11:26 AM | #21 |  
	| 11 Second Club 
				 
                                        
				Join Date: Feb 2008 Location: Edison, NJ 
					Posts: 4,620
				 | 
			
			Need rear (hatch) interior plastics in 98 style gray
		 
				__________________1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
 
 2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
 
 2006 GTO, 11.48 @ 118.3
 |  
	|   |  |  
	
		
	
	
	
		|  06-14-2014, 08:18 AM | #22 |  
	| 
				 
                                        
				Join Date: Jul 2007 Location: North Jersey 
					Posts: 345
				     
                                    
                                 | 
			
			Interested in 2000 Camaro Seats. Please send pics to kurtwvf@msn.com  when you have time.
		
				__________________2013 Chevy Avalanche Black Diamond Edition, 5.3, K&N
 CAI, Magnaflow Exhaust, Blackbear Tune, Ram Air Hood
 1999 Jeep Cherokee XJ
 1979 Pontiac Trans Am WS6, working on it
 1990 Pontiac Trans AM WS6, Sold
 2002 Pontiac Trans Am Firehawk ,#1368 Sold
 1995 Pontiac Trans Am, Traded for Hawk
 1979 Pontiac Trans Am,Black, Never had a chance
 1979 Pontiac Trans Am,Silver, Oak Tree in my way
 1979 Pontiac Trans Am Red WS6 sold
 |  
	|   |  |  
	
		
	
	
	
		|  06-24-2014, 12:41 AM | #23 |  
	| 
				 
                                        
				Join Date: Sep 2009 Location: Staten Island, NY 
					Posts: 206
				     
                                    
                                 | 
			
			Where are u located need rear
		 
				__________________383 Motor with 9:1, P1SC Procharger and much more
 |  
	|   |  |  
	
		
	
	
	
		|  06-26-2014, 05:37 PM | #24 |  
	| 
				 
                                        
				Join Date: Jan 2012 
					Posts: 77
				     
                                    
                                 | 
			
			Sent you a pm. What color are the 98-02 camaro fenders
		 
				__________________ 
				99 Z28 A4, Mufflex 4" catback, SLP lid and ram air, bbk 80mm tb, GMS MAS, Ls6 Intake, poly mm's, pacesetter lts and ORY, REVMAX 3600 Stall, Founders PH Bar and LCA's with relocation brackets, qa1 front coilovers with 300lb springs, heater hose mod, umi tunnel mount torque arm with ds loop. ACE Racing 4l60e, 3.42s.
   |  
	|   |  |  
	
		
	
	
	
		|  06-27-2014, 11:44 PM | #25 |  
	| ^^^Lover of bad cars^^^  Meet Coordinator 
				 
                                        
				Join Date: Aug 2007 Location: Whitehouse Station 
					Posts: 2,276
				     
                                    
                                 | 
			
			Got a ls1 steering knuckle? Steering shaft whatever you wanna call it lol
		 
				__________________1986 Honda VFR750  - 89.3HP to the wheel 
2017 SS M6  - Mods: Nothing Yet.
2026 Tesla Model Y  - lol
   |  
	|   |  |  
	
		
 
  
	
	
	
	
	| 
	|  Posting Rules |  
	| 
		
		You may not post new threads You may not post replies You may not post attachments You may not edit your posts 
 HTML code is Off 
 |  |  |  | 
 |  |