F body part out list

[NJ Torque]

So, I am in the process of changing platforms... that means, all the stuff needs to go.

All parts are for a 98-02 Camaro/Fbody or LSX platform if not a specific part.

Moser 9" rear, 3.70 gear, 35 spline axles, spool, welded backbrace, wolfe dragbar, 1/2" extended studs, comes with LS style backing plates with LS rear calipers that are ground down to fit weld wheels, with brake lines. $2200

TH400 built by Transmission specialties, RMVB, trans brake, rated to 850 HP, large sprag, new clutches, rollerized output, deep pan, new never installed Included is 20 quarts of type F trans fluid. $1400

3" alum drive shaft with 1350 u-joint made for a TH400/9" rear. $250

Edelbrock Vic Jr. intake for L92/LS3 style heads, powdercoated gloss silver(looks chrome) $325

Edelbrock medium profile elbow painted gloss black/clear coated(Infiniti Black obsidian) $115

Comp 224/224 588/588* 114 LSA cam about 6,000 miles $275

Borla adjustable catback has been run and removed, nothing cut, no plates $450

Camaro rear hatch thats gutted, gets pinned closed, Percys lexan rear glass, comes with pins and mounts, painted Artic white, no spoiler. Will accept a SS or Z28 spoiler no problem. $400

Wolfe bolt in 6 point bar, mild steel powdercoated black. Never tested. Rear bars go through speaker grills(have cut speaker grills to fit bars) $600

99-02 Camaro cluster with a Macewean white faced overlay 82XXX miles $100

Nitrous outlet dedicated fuel system for fuse area,

Nitrous Outlet's dedicated fuel systems come complete with a custom built plastic 1 gallon fuel cell, mounting brackets, Walbro in tank fuel pump, Aeromotive fuel regulator, Aeroquip 6 An hose, fuel lines, and fittings.

New never installed or had fuel in it $500

Nitrous outlet stinger plate conversion with jets, braided lines, noid brackets, new never opened $370

Aeroforce scan gauges, pair of red guages, with black faced dials. $290

Pair of front 2000 Z28 camaro cloth seats, no rips or no seat tracks $40

QA1 front coilovers with 275# springs, Q1A rear shocks, single ajdu $550 for the set of 4

4" cowl hood for Camaro, I think its a Harwood, bolt on style, Still in black gelcoat. Slight cracking on the gelcoat but this never bothered me as I was going to paint it. Prior owner said the nut came loose on the hinge and had to add new. $550

TH400 crossmember from UMI for a conversion swap. $125

PTC built converter for a TH400 to a LS style motor. ~4200 RPM stall, new never ran $500

Racestar 'dark stars' 15x3.5/15x10 with proper Fbody backspacing. Mounted are 165/85/15 Nankand radial fronts, rears are 275/60R15 ET street pros, wheels & tires have only about 50 miles on them, mint no damages at all. $1100

Some parts like the cage and rear are still installed in the car and I can pull it out as soon as possible.

I have some STL beacons, strobe lights. They are very bright and are good for snowplowing/security. I have 3 Amber, 1 white. One of the amber lights have been opened and used this winter. $35 each.

[foxriderry]

i bet those dark stars look beautiful, wish I had the green for them, or the rear =/

[redsoxsstink]

what color are the seats?

[stealth355tpi]

Ever sell those exports? I keep going back and fourth about them

[NJ Torque]

Originally Posted by foxriderry

i bet those dark stars look beautiful, wish I had the green for them, or the rear =/

They do look amazing. I won't have the rear pulled for a while. I can take a deposit if you'd like.

Originally Posted by redsoxsstink

what color are the seats?

Dark gray.

Originally Posted by stealth355tpi

Ever sell those exports? I keep going back and fourth about them

I sold that set we were talking about a few months ago.

[stealth355tpi]

Oh well haha thanks

[ThoR294]

3 channel or 4 channel rear?

god damnit all these rears popping up and im broke.

what platform you going to?

[WSex]

Would you sell just the front qa1's

Already have the rears

[LTb1ow]

Pics of elbow or a P/N?

[NJ Torque]

Originally Posted by WSex

Would you sell just the front qa1's

Already have the rears

Would like to keep them together for now.

Originally Posted by LTb1ow

Pics of elbow or a P/N?

3848.

Originally Posted by ThoR294

3 channel or 4 channel rear?

god damnit all these rears popping up and im broke.

what platform you going to?

Neither actually... no ABS/TCS provisions.

[WSex]

Ok let me know
Serious buyer

[KirkEvil]

Sent you a text about the darkstars

[Dave@EFX]

Fire Sale?

[TaKid455]

ABS Module w/ TCS?

[NJ346]

I need the drivers and passenger side exhaust hangers that bolt to the frame rear of the rear axle. Selling them?

[NJ Torque]

Originally Posted by Dave@EFX

Fire Sale?

You know it.

Originally Posted by TaKid455

ABS Module w/ TCS?

Not selling those kind of parts from the car.

Originally Posted by NJ346

I need the drivers and passenger side exhaust hangers that bolt to the frame rear of the rear axle. Selling them?

No sir. Not selling those kinds of parts.

Just extra stuff that was going to go into the car/come from another.

[V]

any shortblocks ? lol

[1984camaroz28]

I will take the qa1s and rear hatch pme ur bottom dollar

[Blackbirdws6]

Have a steering shaft available?

[1984camaroz28]

Is this stuff for sale or no ? no response ?

[NJ Torque]

stinger plate kit sold.

[WSex]

Still interested in front coilovers if split up

[steverc0034]

Can you send me pics of the dedicated fuel system?

[NJ Torque]

224 cam and racestars sold