 |
|
05-30-2007, 08:52 AM
|
#1
|
Join Date: Jan 2006
Posts: 71
|
Stock black valve covers...15
8 Stock Pistons with rods...15
Stock LT1 block with surface rust...100?
Stock Crank with surface rust...20
Stock oil pan...10
Stock Timing chain cover...15
Set of LT1 aluminum heads with heavy duty comp cams valve springs. There is a broken valve cover bolt in one of the heads that i can extract if needed...150? 200?
all of these parts were off of my 93 z28 wich my parents junked on me several years ago. I have a lot more stuff, that is still at my parents. This is what i have in NJ. I dont know what the going prices are on anything or even if this stuff is worth anything... all i know is that i need money badly...
I also have a front end kit from pst the kit is new, and most of the stuff is still in bags, in the original box. it has ball joints, tie rod ends, sway bar bushings etc. I'm not 100% sure everything is there, the box has been opened, and has moved 3 times since i bought it in 03.... 50
not LT1 related i have a holly 4 barrel carb, i know nothing about it, i know that it needs a rebuild...bad...20?
if you see anything you want, or want to take a look at, let me know please...
the car had just over 100,000 on the odometer and ran fine when taken apart
thanks...
Shrek
__________________
Hey donkey!
Last edited by Shrek; 05-31-2007 at 12:13 PM.
Reason: had to add prices...
|
|
|
|
05-30-2007, 02:18 PM
|
#2
|
|
Guest
|
how much for the heads and how many miles on the springs?
|
|
|
|
|
05-30-2007, 03:08 PM
|
#3
|
Join Date: Jan 2006
Posts: 71
|
The springs have less than 5k on them prolly more like 2k, i pulled the motor shortly after i got home from japan, wich was about 2 months after the new springs and cam went in...i honestly dont know what a good price is, the heads are in good shape except for the valve cover bolt as stated...i guess i'll research it and get back to you, or make me an offer...
Shrek
__________________
Hey donkey!
|
|
|
|
|
05-30-2007, 09:31 PM
|
#4
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
I am intreseted in the carb. Can you get the numbers off of the choke horn?
|
|
|
|
|
05-31-2007, 01:17 PM
|
#5
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Oh, do you have a pic of the carb as well? For $20 I'll probably buy it anyway, but I'm just curious what it is.
|
|
|
|
|
05-31-2007, 04:30 PM
|
#6
|
Join Date: Jan 2006
Posts: 71
|
i'm trying to post pics, but they are all too big for some reason, any ideas?
__________________
Hey donkey!
|
|
|
|
|
05-31-2007, 04:31 PM
|
#7
|
Join Date: Dec 2005
Location: Boston/North
Posts: 9,214
|
__________________
Quote:
Originally Posted by BonzoHansen
dumbass.
|
|
|
|
|
|
06-01-2007, 09:33 AM
|
#8
|
Join Date: Jan 2006
Posts: 71
|
here are some of the pick of the holley
__________________
Hey donkey!
|
|
|
|
|
06-01-2007, 09:37 AM
|
#9
|
Join Date: Jan 2006
Posts: 71
|
more of the carb, and one of the heads, i have more of both if any more are needed...thanks
__________________
Hey donkey!
|
|
|
|
|
06-01-2007, 10:06 AM
|
#10
|
Join Date: Jul 2005
Location: Williamstown NJ
Posts: 479
|
I will take the pan. Where are you located?
__________________
F-Bodyless 
01 GMC Sierra C3 6.0L, AWD, Westers Tune, K&N, Hella LED Tails
03 Pontiac Grand Prix GT, GMPP Handling Kit, LS1 F-Body Brakes
|
|
|
|
|
06-01-2007, 11:05 AM
|
#11
|
Join Date: Jan 2006
Posts: 71
|
Mine Hill in morris county...between dover and roxbury...
__________________
Hey donkey!
|
|
|
|
|
06-01-2007, 12:02 PM
|
#12
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Shrek, could you read the numbers on the choke horn?
|
|
|
|
|
06-01-2007, 01:00 PM
|
#13
|
Join Date: Jul 2005
Location: Williamstown NJ
Posts: 479
|
Can you get a shipping quote to ZIP 19020? Thanks
__________________
F-Bodyless
01 GMC Sierra C3 6.0L, AWD, Westers Tune, K&N, Hella LED Tails
03 Pontiac Grand Prix GT, GMPP Handling Kit, LS1 F-Body Brakes
|
|
|
|
|
06-01-2007, 02:12 PM
|
#14
|
Join Date: Jan 2006
Posts: 71
|
Okay Bill, the numbers are 1850-2, i believe its an early 4160 600 cfm...and mark what do you need a quote for? so i know how heavy?
__________________
Hey donkey!
|
|
|
|
|
06-01-2007, 02:26 PM
|
#15
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Perfect. I have an 1850-2 600cfm carb that was, for lack of a better term, "converted" to mechanical secondaries and I need spare parts.
What will shipping to 08822 NJ be?
|
|
|
|
|
06-01-2007, 02:58 PM
|
#16
|
Join Date: Jan 2006
Posts: 71
|
well i'll check on that, for both of you, i didn't realize that you asked for the pan mark...
__________________
Hey donkey!
|
|
|
|
|
06-02-2007, 07:30 PM
|
#17
|
Join Date: Oct 2004
Location: SOUTH JERSEY
Posts: 581
|
you got a pm
__________________
1987 PONTIAC FIREBIRD SHOW WINNER current
1888 Trans Am GTA current
1989 PONTIAC FORMULA WS6 M5 355 sbc 501hp (sold)
1995 PONTIAC FIREBIRD M5 V6 ( sold )
1989 Trans Am GTA 5.7L 67000mi current
|
|
|
|
|
06-02-2007, 08:10 PM
|
#18
|
Join Date: Jan 2006
Posts: 71
|
u got one back
__________________
Hey donkey!
|
|
|
|
|
06-04-2007, 08:28 AM
|
#19
|
Join Date: Jan 2006
Posts: 71
|
okay, the valve covers and heads are gone...still working out the rest of the stuff for the weight on shipping and what not on the other items...
__________________
Hey donkey!
|
|
|
|
|
06-04-2007, 05:41 PM
|
#20
|
Join Date: Oct 2004
Location: SOUTH JERSEY
Posts: 581
|
josh, ill let you know on the block. i didnt know you had it. i know someone who might be interested. what kind shape is it in?
__________________
1987 PONTIAC FIREBIRD SHOW WINNER current
1888 Trans Am GTA current
1989 PONTIAC FORMULA WS6 M5 355 sbc 501hp (sold)
1995 PONTIAC FIREBIRD M5 V6 ( sold )
1989 Trans Am GTA 5.7L 67000mi current
|
|
|
|
|
06-04-2007, 10:16 PM
|
#21
|
Join Date: Jan 2006
Posts: 71
|
The block is overall in good shape...last time i had it out, i had it checked for cracks, honed, and prepped by a machine shop down in NC...the block along with all of the other stuff has been sitting for a while, and basically has a normal amount of rust on it...i can take some pics of it if you want and post them up on here...lemme know...
__________________
Hey donkey!
|
|
|
|
|
06-04-2007, 11:48 PM
|
#22
|
Join Date: Oct 2004
Location: SOUTH JERSEY
Posts: 581
|
sounds good send me some pics. thanx
__________________
1987 PONTIAC FIREBIRD SHOW WINNER current
1888 Trans Am GTA current
1989 PONTIAC FORMULA WS6 M5 355 sbc 501hp (sold)
1995 PONTIAC FIREBIRD M5 V6 ( sold )
1989 Trans Am GTA 5.7L 67000mi current
|
|
|
|
|
06-07-2007, 04:02 PM
|
#23
|
Join Date: Jul 2005
Location: Williamstown NJ
Posts: 479
|
Any word on the oil pan shipping quote?
__________________
F-Bodyless
01 GMC Sierra C3 6.0L, AWD, Westers Tune, K&N, Hella LED Tails
03 Pontiac Grand Prix GT, GMPP Handling Kit, LS1 F-Body Brakes
|
|
|
|
|
06-08-2007, 09:52 AM
|
#24
|
Join Date: Jan 2006
Posts: 71
|
The carb shipping will be about 7.55 shipping parcel post about 2 days...and the pan, about 5 bucks, for priority wich will arive in about 2 days... sorry this took so long, guys, i've been having difficulties with my life...lemme know if this is a go...i looked a little closer at the pan, there is some light rust ont he inside, nothing a little sand paper wont fix though, it has been sittinf for a long time...thanks
__________________
Hey donkey!
|
|
|
|
|
06-08-2007, 10:18 AM
|
#25
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Cool, thanks. Do you take Paypal?
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
