Looking for a good U-pull-it in South Jersey

[91chevywt]

Well, I am trying to get a VATS module today with a key. Forest Grove motors decided to change their schedule to Wednesday-Friday....

Baker Electronix has not been to helpful with helping me solve my VATS problem, so I am not going to use their product.

Does anybody know of a good yard in south jersey I could get to today? I have been itching to get this damn car running for over two weeks...i'm tired of it just sitting there.

Unless theres someone around who happens to have one I could use, that would be great.

[black95maro]

just wire the proper resistor into the vats wire (orange) and by pass is completely.

[bobb1589]

Originally Posted by black95maro

just wire the proper resistor into the vats wire (orange) and by pass is completely.

how do we know which resistor to get? does it go by year / model?

[91chevywt]

I don't have a VATS module so the resistor bypass won't work. I have a 93 ECM, I probably should have mentioned. The theft deterrent module is totally separate from the ECM, and I don't have it. It is similar to the system in the third gen cars. A Third gen module would also work for this ECM.

I also should mention this is an engine swap into a 79 z28.

I would need the module with the matching key, then I could use a resistor to trigger the fuel enable signal which is sent from that module.

[Scrat's_Camaro]

there is a junkyard on 322 east of williamstown called shorty's and there is a u-pull it near berlin http://yellowpages.aol.com/business/...arch%26flv%3D1

[deadtrend1]

Originally Posted by bobb1589

how do we know which resistor to get? does it go by year / model?

take a multimeter to the key

oh, Albion U-pull it down in Berlin

[B4C]

There was a camaro/f-bird only yard in williamstown but the owner died so its no longer open, you could try dirks its alittle bit farther down the pike towards the shore shortys is alright but I prefer dirks

[91chevywt]

Got what I need, thanks for the input!