 |
08-12-2010, 04:06 PM
|
#1
|
Join Date: Aug 2007
Location: Piscataway, N.J.
Posts: 1,729
|
Anybody recommend a GOOD shop to replace a headliner?
Just noticed that the headliner on my 1991 Firebird is starting to sag. I know you cannot repair the existing material because the foam is starting to dry rot so I need a QUALITY shop that can replace the roof with a new liner. What do these headliners cost to replace 
__________________
1991 FORMULA 350-GONE BUT NOT FORGOTTEN
1 of 1,197 with L98 Option/13.79@100 mph
1994 25th ANNIVERSARY TRANS AM GT -1 of ONLY 2,000 made/ Only 128 made with a HURST 6-Speed Manual and 91 with T-Tops and Compact Disc/ K & N Filtercharger/Magnaflow Performance Muffler/Air Foil- ORIGINAL MINT Arctic White Ultra Rare SURVIVOR. DAYTONA 500 PACE CAR Decal Kit!
SOLD: 1989 Turbo T/A in 1991 it ran 12:18@115 mph
|
|
|
|
08-12-2010, 04:17 PM
|
#2
|
|
12 Second Club
Join Date: Aug 2004
Location: West Milford
Posts: 8,373
|
i used this place a few years ago, its in bogota... between hackensack and teaneck
http://www.electricsunroof.com
i think it was about 120 for a hardtop 3rd gen
__________________
88 Camaro
95 Impala SS
97 Trans Am WS6
98 Blazer ZR2
00 Corvette
04 CTS-V
04 Grand Cherokee
06 GMC Sierra
07 Sublime Charger Daytona
12 Tahoe LT
17 Malibu LT
|
|
|
|
|
08-12-2010, 04:23 PM
|
#3
|
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
|
Quote:
Originally Posted by maroman88
i used this place a few years ago, its in bogota... between hackensack and teaneck
http://www.electricsunroof.com
i think it was about 120 for a hardtop 3rd gen |
They're a very clean shop, and nice guys to deal with. Years ago I had them install a sunroof in a Maxima, and they did a fantastic job. They also repaired a Cutlass I owned with the GM Astroroof - new headliner and trim. Definitely worth it, if you don't want to tackle it yourself. The aftermarket headliners molded to the ABS boards are really great - I have one in my Monte with no complaints at all.
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!
Former Toy - '88 Monte SS - had lots of mods...
|
|
|
|
|
08-13-2010, 06:14 PM
|
#4
|
Join Date: Sep 2006
Location: South Plainfield, NJ
Posts: 1
|
Everlast Interiors in Linden did a good job for me last year. About $120 I think, but I had some work done on the seats too, so I don't remember the breakdown exactly.
www.everlastinteriors.com
|
|
|
|
|
08-18-2010, 10:29 PM
|
#5
|
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
|
Ed I can do it for you as well. I've done 4 headliners in the last month so I'm in practice.
__________________
--==RPM Resto & Custom==--
1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
|
|
|
|
|
08-19-2010, 08:19 PM
|
#6
|
Join Date: Aug 2007
Location: Piscataway, N.J.
Posts: 1,729
|
PM sent!
__________________
1991 FORMULA 350-GONE BUT NOT FORGOTTEN
1 of 1,197 with L98 Option/13.79@100 mph
1994 25th ANNIVERSARY TRANS AM GT -1 of ONLY 2,000 made/ Only 128 made with a HURST 6-Speed Manual and 91 with T-Tops and Compact Disc/ K & N Filtercharger/Magnaflow Performance Muffler/Air Foil- ORIGINAL MINT Arctic White Ultra Rare SURVIVOR. DAYTONA 500 PACE CAR Decal Kit!
SOLD: 1989 Turbo T/A in 1991 it ran 12:18@115 mph
|
|
|
|
|
08-19-2010, 09:16 PM
|
#7
|
Join Date: Nov 2009
Location: Oldbridge
Posts: 701
|
Atlas Auto Trim
Since 1938 Tops and Interiors
732 985 6800
thats where i went with my 3rd gen... they did a great job if your familiar with edison its right next to edison diner (small garage usually converatbles all parked outside)
i paid 300 all together for the new headliner (replaced the foam as well) and they redid my door panels cause they were slightly torn and coming loose as well.
__________________
2001 Camaro SS M6 LMII w/ LID (currently DD)
1987 Camaro IROC-Z 5.7 TPI RIP
1991 BMW 325i RIP
Last edited by fmybody; 08-19-2010 at 10:36 PM.
|
|
|
|
|
08-19-2010, 10:29 PM
|
#8
|
Join Date: Aug 2007
Location: Piscataway, N.J.
Posts: 1,729
|
Thanks for the help guys. I also want to get the seat bolsters done on the bottom of the drivers seat. They are starting to flatten out and do not match the passenger seat design. I guess 20 years of my fat ass are starting to pack it down!
__________________
1991 FORMULA 350-GONE BUT NOT FORGOTTEN
1 of 1,197 with L98 Option/13.79@100 mph
1994 25th ANNIVERSARY TRANS AM GT -1 of ONLY 2,000 made/ Only 128 made with a HURST 6-Speed Manual and 91 with T-Tops and Compact Disc/ K & N Filtercharger/Magnaflow Performance Muffler/Air Foil- ORIGINAL MINT Arctic White Ultra Rare SURVIVOR. DAYTONA 500 PACE CAR Decal Kit!
SOLD: 1989 Turbo T/A in 1991 it ran 12:18@115 mph
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
