 |
03-21-2011, 06:49 PM
|
#1
|
|
12 Second Club
Join Date: Mar 2009
Location: metuchen, nj
Posts: 1,476
|
Rear end decison
so once again i blew my rear... I want to replace it with anything stronger 12bolt/9'/8.8 whatever as long as it holds. Currently i cant find a good deal on a used rear and buying a new one is way out of my price range.
This leaves me a little undecided, should i slap in a replacement ten-bolt and hope it holds or just leave the car on jackstands until i can afford a proper rear.
__________________
|
|
|
|
03-21-2011, 07:20 PM
|
#2
|
Join Date: Apr 2008
Location: Delran
Posts: 6,785
|
it wont hurt to toss a cheap stock unit in if you want the car drivable till you can afford a nice rear and do all the research into what you want. just take it easy on the car.
|
|
|
|
|
03-21-2011, 08:37 PM
|
#3
|
Join Date: Jul 2008
Posts: 485
|
i went through a few ten bolts and finally pulled my head out of my ass and decided to buy a 12 bolt, only a little over 2k brand new shipped to my door, now i just need the money lol..and if you can do without your car take it off insurance so you save the money from that to helpfund the rear, if not just buy a replacement ten bolt
Last edited by jts98z28; 03-21-2011 at 08:38 PM.
|
|
|
|
|
03-21-2011, 08:40 PM
|
#4
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,170
|
"leave the car on jackstands " - worst idea listed. cars are not sedentary things and sitting is bad for them. and it is a waste of car.
either pony up and get a good one or buy a cheapo replacement, stay away from slicks and start saving your pennies.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
03-21-2011, 09:00 PM
|
#5
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,370
|
s60s are cheap and I always see rears in classifieds. I saved around $1200 on the used one I bought.
|
|
|
|
|
03-22-2011, 04:04 AM
|
#6
|
Join Date: Jul 2009
Location: barnegat nj
Posts: 1,340
|
pm NJtorque.....he has like 10 or 15 rears laying around... lol
__________________
Quote:
Originally Posted by SRGN
I never pulled into the staging beams at the track and saw a dyno in the other lane.
|
South Jersey Racecraft
|
|
|
|
|
03-22-2011, 04:59 PM
|
#7
|
|
12 Second Club
Join Date: Mar 2009
Location: metuchen, nj
Posts: 1,476
|
Quote:
Originally Posted by S.J.SLEEPER
pm NJtorque.....he has like 10 or 15 rears laying around... lol
|
He sold his rears i think
__________________
|
|
|
|
|
03-25-2011, 08:59 AM
|
#8
|
|
Sliderule / Moderator
Join Date: Oct 2004
Location: Catawissa PA
Posts: 2,294
|
As already said, there isn't a cheap upgrades for rears.
Your options are a 12 bolt, Ford 9 or Dana 60 style, each are around $2500 dependng on drive shaft, backing plates etc needed.
Throw in another stocker, and don't run sticky tires.
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
1) Build it
2) Race it
3) Break it
4) Repeat!!!
|
|
|
|
|
03-25-2011, 12:48 PM
|
#9
|
|
12 Second Club
Join Date: Mar 2009
Location: metuchen, nj
Posts: 1,476
|
Ya but i blew the rear on allseason tires that are only 245's
__________________
|
|
|
|
|
03-25-2011, 01:43 PM
|
#10
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,170
|
I've ruined one of those crappy 7.5 rears on 255/60/15 Radial TAs. You have 2 options: Either buy the right rear now or throw a cheap used one in and save your money, and hope you trip on a good used rear. Or learn to love the peg-leg.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
03-25-2011, 04:14 PM
|
#11
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,941
|
Quote:
Originally Posted by BonzoHansen
I've ruined one of those crappy 7.5 rears on 255/60/15 Radial TAs. You have 2 options: Either buy the right rear now or throw a cheap used one in and save your money, and hope you trip on a good used rear. Or learn to love the peg-leg.
|
And my ten bolt lives gloriously on MT ET streets...
Just buy a stock rear, leave it alone ( weren't you the guy who didn't know something was reverse threaded?) and don't drive like an asshat.
Save for a real rear end and win.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
03-25-2011, 08:54 PM
|
#12
|
|
12 Second Club
Join Date: Mar 2009
Location: metuchen, nj
Posts: 1,476
|
bleh but dropping money on a rear takes me that much further from something halfway decent.Right now the car is sitting and im slowly fixing the little odds and ends since its off the road anyway
And ya i ****ed up the first time i did a rebuild. but i learn through my mistakes. atleast i dont gotta pop my hood to turn off my fuelpump
__________________
Last edited by thunder; 03-25-2011 at 09:07 PM.
|
|
|
|
|
03-27-2011, 11:18 AM
|
#13
|
Join Date: Aug 2005
Location: Blackwood, NJ
Posts: 2,295
|
What about a older 9 bolt out of a 3rd gen? I had one in my 88 GTA and was told they hold up better then a 10bolt and you can get one from the junk yard for about the same price as a 10 bolt.. Might last a little longer untill you get a real rear end!!
__________________
Jeff
2002 WS6 T/A.. M6..Built 383 TMR tune..461rwhp,458rwtq
2009 G8 GT. Bone stock 13.6@103.. Vararam Intake, GXP Axlebacks, LS2 FRC's
1998 Corvette Convertible, Vararam Intake+Power Duct, Fast 90/90, Ti Axleback..12.8@110
2003 Cobra Convertible 10th Anniversary
http://www.fquick.com/slow-v6
Local car cruise schedule..
http://www.cliffscalendar.com/
|
|
|
|
|
03-27-2011, 05:32 PM
|
#14
|
Join Date: Apr 2008
Location: Delran
Posts: 6,785
|
Quote:
Originally Posted by Slow-V6
What about a older 9 bolt out of a 3rd gen? I had one in my 88 GTA and was told they hold up better then a 10bolt and you can get one from the junk yard for about the same price as a 10 bolt.. Might last a little longer untill you get a real rear end!!
|
third gen rears are narrower than a 4th gen. besides that i dont think it would direct bolt in anyway.
|
|
|
|
|
03-27-2011, 07:13 PM
|
#15
|
|
12 Second Club
Join Date: Mar 2009
Location: metuchen, nj
Posts: 1,476
|
right now it looks like going with a Ford 8.8
__________________
|
|
|
|
|
03-27-2011, 07:58 PM
|
#16
|
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,476
|
Quote:
Originally Posted by NastyEllEssWon
third gen rears are narrower than a 4th gen. besides that i dont think it would direct bolt in anyway.
|
3rd gen rear is a direct bolt in, but he would need to run 3rd gen wheels in the rear to keep the spacing right.
Quote:
Originally Posted by thunder
right now it looks like going with a Ford 8.8
|
Seriously? The money you spend getting the 8.8 to fit and bolt up would be much better saved towards the aftermarket bolt in rear of your choice.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
|
|
03-27-2011, 10:26 PM
|
#17
|
Join Date: Jul 2008
Posts: 485
|
Quote:
Originally Posted by thunder
right now it looks like going with a Ford 8.8
|
if you decide to go that way pm me i have a 8.8 from a mustang with 3.73s
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
