| 
| 
	
		|  |  |  
	
	
		
	
	
	
		|  10-25-2011, 06:36 PM | #1 |  
	| Power Member / trans break does not equal transbrake 
				 
                                        
				Join Date: May 2009 Location: The Meadowlands 
					Posts: 4,534
				 | 
				
				Unknown Wire
			 
 
			
			as some of you know my radio is messed up, so today i was free and decided to take it all out in an effort to install the new stuff. I  came across this   
stereo is my downfall when it comes to cars, the speaker wire goes to the rear speaker, but why is it tapped off that harness? and what harness is that?  its the only one tapped into that harness....
		
				__________________99 Z28 - SBE LS1/60e
 Motor - 10.84 @ 128 - 1.47 60'
 Nitrous - 10.16 @ 132 - 1.40 60"
 |  
	|   |   |  
	
		
	
	
	
		|  10-25-2011, 08:21 PM | #2 |  
	| Admin. 
				 
                                        
				Join Date: Aug 2005 Location: Hamilton, NJ 
					Posts: 20,170
				     
                                    
                                 | 
			
			what vehicle is this?
		 
				__________________Vent Windows Forever! 
 The looser the waistband, the deeper the quicksand. Or so I have read.
 
 Feather-light suspension, Konis just couldn't hold.  I'm so glad I took a look inside your showroom doors.
 
 Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
 |  
	|   |   |  
	
		
	
	
	
		|  10-25-2011, 08:26 PM | #3 |  
	| Power Member / trans break does not equal transbrake 
				 
                                        
				Join Date: May 2009 Location: The Meadowlands 
					Posts: 4,534
				 | 
			
			my camaro. 01 Z28.
 its right behind the passenger kick panel, as you may be able to tell bc thats the door hinges lol
 
				__________________99 Z28 - SBE LS1/60e
 Motor - 10.84 @ 128 - 1.47 60'
 Nitrous - 10.16 @ 132 - 1.40 60"
 |  
	|   |   |  
	
		
	
	
	
		|  10-25-2011, 08:46 PM | #4 |  
	| Mongo the Meet Coordinator 
				 
                                        
				Join Date: May 2008 
					Posts: 16,941
				     
                                    
                                 | 
			
			I think that harness goes back for rear sub and speakers, so I would guess some sort of aftermarket speaker nonsense.
		 
				__________________ 
	Quote: 
	
		| 
					Originally Posted by KirkEvil  repo bigals turd gen and part it out to a loving home |  |  
	|   |   |  
	
		
	
	
	
		|  10-25-2011, 08:46 PM | #5 |  
	| Admin. 
				 
                                        
				Join Date: Aug 2005 Location: Hamilton, NJ 
					Posts: 20,170
				     
                                    
                                 | 
			
			try the auto zone web site, it has wiring diagrams
		 
				__________________Vent Windows Forever! 
 The looser the waistband, the deeper the quicksand. Or so I have read.
 
 Feather-light suspension, Konis just couldn't hold.  I'm so glad I took a look inside your showroom doors.
 
 Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 07:22 AM | #6 |  
	| Meet Coordinator 
				 
                                        
				Join Date: Jan 2008 Location: brick/pt. pleasant beach 
					Posts: 19,370
				     
                                    
                                 | 
			
			That flat looking wire that goes out of frame? Looks aftermarket as hell.
		 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 01:51 PM | #7 |  
	| Power Member / trans break does not equal transbrake 
				 
                                        
				Join Date: May 2009 Location: The Meadowlands 
					Posts: 4,534
				 | 
			
			the flat wire that goes out of frame is speaker wire. that was ran to the rear.  last night i took out ALL the speakers and wiring for the stereo except the ones pictured. simply because that was the only speaker tied into that harness. is that harness for the stock speakers?
		 
				__________________99 Z28 - SBE LS1/60e
 Motor - 10.84 @ 128 - 1.47 60'
 Nitrous - 10.16 @ 132 - 1.40 60"
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 01:52 PM | #8 |  
	| Power Member / trans break does not equal transbrake 
				 
                                        
				Join Date: May 2009 Location: The Meadowlands 
					Posts: 4,534
				 | 
			
			i know some of you seen the electrical mess my car was, there was enuff speaker wire to go from my garage door to the sidewalk and back 4 times. and there was a BUNDLE of it under the dash.
 opinions on just making my own harness?  my dad is an electrician so no HaXorz.
 
				__________________99 Z28 - SBE LS1/60e
 Motor - 10.84 @ 128 - 1.47 60'
 Nitrous - 10.16 @ 132 - 1.40 60"
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 02:19 PM | #9 |  
	| Admin. 
				 
                                        
				Join Date: Aug 2005 Location: Hamilton, NJ 
					Posts: 20,170
				     
                                    
                                 | 
			
			The cut wires might be the oe speaker leads.  The colors look familiar.
		 
				__________________Vent Windows Forever! 
 The looser the waistband, the deeper the quicksand. Or so I have read.
 
 Feather-light suspension, Konis just couldn't hold.  I'm so glad I took a look inside your showroom doors.
 
 Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 02:21 PM | #10 |  
	| Power Member / trans break does not equal transbrake 
				 
                                        
				Join Date: May 2009 Location: The Meadowlands 
					Posts: 4,534
				 | 
			
			
	Quote: 
	
		| 
					Originally Posted by BonzoHansen  The cut wires might be the oe speaker leads.  The colors look familiar. |  so that would mean that harness is for the OE speaker system? so id essantially be able to make my own harness of that to power the rest of the speakers. 
 
im not doin a system in the car, i just want my stock stuff to work again
		 
				__________________99 Z28 - SBE LS1/60e
 Motor - 10.84 @ 128 - 1.47 60'
 Nitrous - 10.16 @ 132 - 1.40 60"
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 02:28 PM | #11 |  
	| Admin. 
				 
                                        
				Join Date: Aug 2005 Location: Hamilton, NJ 
					Posts: 20,170
				     
                                    
                                 | 
			
			If I were you I'd get the oe wiring diagrams and start checking.  Then you can pull the other junk out
		 
				__________________Vent Windows Forever! 
 The looser the waistband, the deeper the quicksand. Or so I have read.
 
 Feather-light suspension, Konis just couldn't hold.  I'm so glad I took a look inside your showroom doors.
 
 Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 02:28 PM | #12 |  
	| Mongo the Meet Coordinator 
				 
                                        
				Join Date: May 2008 
					Posts: 16,941
				     
                                    
                                 | 
			
			I would buy a new body harness versus making your own.
		 
				__________________ 
	Quote: 
	
		| 
					Originally Posted by KirkEvil  repo bigals turd gen and part it out to a loving home |  |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 02:37 PM | #13 |  
	| Ayatollah of Rock N Rolla / Admin 
				 
                                        
				Join Date: Mar 2006 Location: Parts Unknown 
					Posts: 12,573
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by BonzoHansen  The cut wires might be the oe speaker leads.  The colors look familiar. |  This is what I am thinking too. It looks like that aftermarket wire is not tapped into anything from the pic, looks like it may just be wrapped up to keep it, uh, "neat".
		 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 02:38 PM | #14 |  
	| Admin. 
				 
                                        
				Join Date: Aug 2005 Location: Hamilton, NJ 
					Posts: 20,170
				     
                                    
                                 | 
			
			Or just fix it.  At least check it. Most hack install jobs leave the  oe wires in place, give or take a terminal
		 
				__________________Vent Windows Forever! 
 The looser the waistband, the deeper the quicksand. Or so I have read.
 
 Feather-light suspension, Konis just couldn't hold.  I'm so glad I took a look inside your showroom doors.
 
 Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 02:44 PM | #15 |  
	| Power Member / trans break does not equal transbrake 
				 
                                        
				Join Date: May 2009 Location: The Meadowlands 
					Posts: 4,534
				 | 
			
			i have 2 complete harnesses from a 93 and 95....   same thing?
		 
				__________________99 Z28 - SBE LS1/60e
 Motor - 10.84 @ 128 - 1.47 60'
 Nitrous - 10.16 @ 132 - 1.40 60"
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 02:52 PM | #16 |  
	| Ayatollah of Rock N Rolla / Admin 
				 
                                        
				Join Date: Mar 2006 Location: Parts Unknown 
					Posts: 12,573
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by LS1ow  i have 2 complete harnesses from a 93 and 95....   same thing? |  If they are in fact stock speaker wires it will depend on what the OEM sound system was.
		 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 02:55 PM | #17 |  
	| Admin. 
				 
                                        
				Join Date: Aug 2005 Location: Hamilton, NJ 
					Posts: 20,170
				     
                                    
                                 | 
			
			Why are you so hot on changing the whole harness?  Is anything else not working out just the stereo?
		 
				__________________Vent Windows Forever! 
 The looser the waistband, the deeper the quicksand. Or so I have read.
 
 Feather-light suspension, Konis just couldn't hold.  I'm so glad I took a look inside your showroom doors.
 
 Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 02:59 PM | #18 |  
	| Power Member / trans break does not equal transbrake 
				 
                                        
				Join Date: May 2009 Location: The Meadowlands 
					Posts: 4,534
				 | 
			
			well not the harness accually, i need all new wiring for the speakers/head unit.
 the problem was the headunit had power and worked for the first few minutes drivering the car #literly and then no more sound. headunit works fine, lights up, plays the CDs, plays the ipod, just no sound. and i saw all the exess wire and hackjob of wiring so i want to redo the whole thing.
 
				__________________99 Z28 - SBE LS1/60e
 Motor - 10.84 @ 128 - 1.47 60'
 Nitrous - 10.16 @ 132 - 1.40 60"
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 03:00 PM | #19 |  
	| Ayatollah of Rock N Rolla / Admin 
				 
                                        
				Join Date: Mar 2006 Location: Parts Unknown 
					Posts: 12,573
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by LS1ow  well not the harness accually, i need all new wiring for the speakers/head unit.
 the problem was the headunit had power and worked for the first few minutes drivering the car #literly and then no more sound. headunit works fine, lights up, plays the CDs, plays the ipod, just no sound. and i saw all the exess wire and hackjob of wiring so i want to redo the whole thing.
 |  Check and see if it's something as simple as a loose connection. If you lost ALL sound from every speaker then it's probably up at the head unit.
		 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 03:01 PM | #20 |  
	| Admin. 
				 
                                        
				Join Date: Aug 2005 Location: Hamilton, NJ 
					Posts: 20,170
				     
                                    
                                 | 
			
			Sounds like a head unit issue.  A writing problem probably won't cause what you are describing
		 
				__________________Vent Windows Forever! 
 The looser the waistband, the deeper the quicksand. Or so I have read.
 
 Feather-light suspension, Konis just couldn't hold.  I'm so glad I took a look inside your showroom doors.
 
 Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 03:03 PM | #21 |  
	| Power Member / trans break does not equal transbrake 
				 
                                        
				Join Date: May 2009 Location: The Meadowlands 
					Posts: 4,534
				 | 
			
			ive tried different head units to no avail. i even tried a stock one my friend had laying around.   
 you know how when you buy an aftermarket headunit you have to addapt it to the harness with the plug? well they had 3 plugs betweeen the headunit and the stock one.
 
				__________________99 Z28 - SBE LS1/60e
 Motor - 10.84 @ 128 - 1.47 60'
 Nitrous - 10.16 @ 132 - 1.40 60"
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 03:57 PM | #22 |  
	| Meet Coordinator 
				 
                                        
				Join Date: Jan 2008 Location: brick/pt. pleasant beach 
					Posts: 19,370
				     
                                    
                                 | 
			
			The stock bose system has an amp in the back and you need a special adapter harness between the headunit if you use it. You could just rewire the whole thing with regular wire to each speaker. The cut wires appear to be speaker wire to me.
		 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 06:02 PM | #23 |  
	| Power Member / trans break does not equal transbrake 
				 
                                        
				Join Date: May 2009 Location: The Meadowlands 
					Posts: 4,534
				 | 
			
			
	Quote: 
	
		| 
					Originally Posted by sweetbmxrider  The stock bose system has an amp in the back and you need a special adapter harness between the headunit if you use it. You could just rewire the whole thing with regular wire to each speaker. The cut wires appear to be speaker wire to me. |  dont think i have an amp...   the sound system DID work the way it is set up now at one point, i guess there was just a break or fray in the wire somewere. 
 
i kinda feel like its gunna be the easiestto just figure were the stock speaker stuff starts, and run from there.
		 
				__________________99 Z28 - SBE LS1/60e
 Motor - 10.84 @ 128 - 1.47 60'
 Nitrous - 10.16 @ 132 - 1.40 60"
 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 07:01 PM | #24 |  
	| Meet Coordinator 
				 
                                        
				Join Date: Jan 2008 Location: brick/pt. pleasant beach 
					Posts: 19,370
				     
                                    
                                 | 
			
			If you want me to look at it and then laugh, come on down.
		 |  
	|   |   |  
	
		
	
	
	
		|  10-26-2011, 08:36 PM | #25 |  
	| Power Member / trans break does not equal transbrake 
				 
                                        
				Join Date: May 2009 Location: The Meadowlands 
					Posts: 4,534
				 | 
			
			well i think im gunna have it figured out by the weekend, and if its not working by then, im fiberglassings a boombox into my dash
		 
				__________________99 Z28 - SBE LS1/60e
 Motor - 10.84 @ 128 - 1.47 60'
 Nitrous - 10.16 @ 132 - 1.40 60"
 |  
	|   |   |  
	
		
 
  
	
	
	
	
	| 
	|  Posting Rules |  
	| 
		
		You may not post new threads You may not post replies You may not post attachments You may not edit your posts 
 HTML code is Off 
 |  |  |  | 
 |  |