|
03-05-2012, 03:42 PM
|
#1
|
Join Date: Jan 2007
Location: Southeast, PA / Brick, NJ (Lost due to Sandy)
Posts: 238
|
Blingmaster & TT2's = :D
I was a professional detailer for 6-7 years when I was a young'n. I worked for most any car dealership brand you can think of. I've used a ton of wheel cleaners and other products over the years. After seeing the [mostly] ranting and raving reviews, I figured I'd give Blingmaster a shot. I had 1 hour to do my wheels during my lunch break last Friday. Not much time as you all know. Only snapped a couple shots, but the two I took show a huge difference. The car sat out all winter, was not driven more than once or twice a month when the ground was not salty. This is the first time I've cleaned the wheels since late last summer (September/October). Pardon the crappy cell phone shots:
Before:
After only 15 mins of light work:
I plan to put some more work into them once it warms up later this week. I need to take the wheels off the car one by one and do both the inside and outside of the wheel. The inside is going to need some wet sanding or brillo-pad-ish work. But, I am VERY happy with the outcome of this product so far.
__________________
-Rick (Photographer)
- 2001 Trans AM WS6 - M6, ORY, Borla catback, etc.
- 1998 Trans Am - M6, functional Ram Air hood, Flowmaster, 3" QTP E-cutout, ORY, K&N FIPK, 3.42's, LSD, Hella 60mm Projectors, 4300K HID's & more.
- 2003 VW Golf TDI - Turbo diesel @ 50 MPG highway
- 1998 Jeep Grand Cherokee 5.9L(ZJ) - 4.75" lift, 32" MTZ's, armor, etc.
|
|
|
03-05-2012, 03:57 PM
|
#2
|
Join Date: Oct 2007
Location: Sewell, NJ
Posts: 1,044
|
never heard of the stuff but I don't think my old tt's ever looked that good. Very nice
|
|
|
03-05-2012, 03:57 PM
|
#3
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,361
|
Blingmaster works well but I would recommend a good sealant as they leave the metal pretty raw.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
03-05-2012, 04:02 PM
|
#4
|
Join Date: Jan 2007
Location: Southeast, PA / Brick, NJ (Lost due to Sandy)
Posts: 238
|
USP: Thanks! If you have 'em and they are worse than this, their "Green" stuff works wonders so I have seen over on Tech. Also, some nice 1500-2000 grit wet sanding will do a great job at getting any corrosion or oxidation off the wheels, then polish them back up to a brilliant shine.
BB: I ordered their sealant as well. I need to work the wheels once or twice more, 'til they are perfect (or close), then seal it all up
__________________
-Rick (Photographer)
- 2001 Trans AM WS6 - M6, ORY, Borla catback, etc.
- 1998 Trans Am - M6, functional Ram Air hood, Flowmaster, 3" QTP E-cutout, ORY, K&N FIPK, 3.42's, LSD, Hella 60mm Projectors, 4300K HID's & more.
- 2003 VW Golf TDI - Turbo diesel @ 50 MPG highway
- 1998 Jeep Grand Cherokee 5.9L(ZJ) - 4.75" lift, 32" MTZ's, armor, etc.
Last edited by GhostDakota; 03-05-2012 at 04:04 PM.
|
|
|
03-05-2012, 05:43 PM
|
#5
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,345
|
Nice, bling up your calipers!
|
|
|
03-05-2012, 05:55 PM
|
#6
|
Join Date: Jan 2007
Location: Southeast, PA / Brick, NJ (Lost due to Sandy)
Posts: 238
|
Thanks - I have brand new rotors & pads on the way. The fronts will be here by Friday, the rears are backordered (3 weeks). When I take the wheels off I'll be repainting the calipers gloss black.
__________________
-Rick (Photographer)
- 2001 Trans AM WS6 - M6, ORY, Borla catback, etc.
- 1998 Trans Am - M6, functional Ram Air hood, Flowmaster, 3" QTP E-cutout, ORY, K&N FIPK, 3.42's, LSD, Hella 60mm Projectors, 4300K HID's & more.
- 2003 VW Golf TDI - Turbo diesel @ 50 MPG highway
- 1998 Jeep Grand Cherokee 5.9L(ZJ) - 4.75" lift, 32" MTZ's, armor, etc.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|