|
LS1 Parts: Pushrods, 241 Heads, SVO Red Injectors
1.) Set of 8 Trend 7.275" and 8 Comp 7.250" pushrods, 0.080" wall, 5/16" diameter, hardened. My cam had slightly different lobe base circle on intake vs. exhaust so I used longer 7.275" rods on the intake side to match the lifter preload and get a very quiet valvetrain. Less than 2 hours runtime.
asking price: $90
2.) Pair of 2001 241 casting heads, cleaned and serviced by PW Machine Shop in East Hanover. Install your preferred springs, seals/seats, retainers, and locks.
asking price: $100
3.) Rail and injector package includes '98 Vette return-type rail, '02 LS6 single inlet rail, and new-design red Ford SVO 30 lb/hr injectors with flow bench sheet from New Era Performance. Injectors have very little run time. Injector clips not included.
asking price: $250 for both rails and the injectors.
Last edited by crainholio; 06-23-2013 at 01:03 PM.
|
